Section 4
4.1: Inline Gac Filters
Inline coconut shell granular activated carbon (GAC) is typically used for reducing chlorine taste, odor, and organic chemicals. The filter design allows for maximum contact time for optimal chemical adsorption.
Features:
- Reduce taste/odor/chlorine and some VOC’s from water
Applications:
- Commercial and residential drinking water systems
- Pre-and post-reverse osmosis filtration
- Water coolers
- Restaurants and food service
Materials of Construction:
- Filter Media: Coconut Shell Granular activated carbon
- Outer Shell: Polypropylene
- Inner Pads: Polypropylene
- Temperature Rating: 40-125°F
- Maximum Pressure: 100 psi
Inline Gac Filters
Item | Filter Size* | Filtration Type* | In/Out Ports | Filter Life* |
IL-2006GAC-14F | 2” X 6” | Coconut Shell GAC | 1/4” FPT | 750 Gallons |
IL-2006GAC-14Q | 1/4” QC | |||
IL-2010GAC-14F | 2” X 10” | 1/4” FPT | 1,500 Gallons | |
IL-2010GAC-14Q | 1/4” QC | |||
IL-2512GAC-14F | 2.5” X 12” | 1/4” FPT | 3,000 Gallons | |
IL-2006GAC-14Q | 1/4” QC |
* Specifications are nominal, intended for reference only. Filter life depends on operating conditions.
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
4.2: Inline Specialty Filters
Inline Alkaline and Mineral filters are typically used to add minerals back into the water. Both Alkaline and Mineral filters will increase the pH and TDS of water supplied. The filter design allows for maximum contact time with various media inside.
Features:
- Increase Alkalinity, pH, and TDS of water
- Easy and sanitary cartridge disposal
- Low pressure drop
Applications:
- Residential and commercial drinking water systems
- Post reverse osmosis filtration
- Water coolers
- Restaurants and food service
Materials of Construction:
- Filter Media: Proprietary blend of natural earth stones and mineral rocks
- Outer Shell: Polypropylene
- Inner Pads: Polypropylene
- Temperature Rating: 40-125°F
- Maximum Pressure: 100 psi
Inline Specialty Filters
Item | Filter Size* | Filtration Type * | In/Out Ports | pH Boost * | Filter Life * |
SP-IL2010-ALK | 2” X 10” | Alkaline Media | 1/4” FPT | 0.5 – 1.0 | 4 – 6 Months |
SP-IL2012-MABA | 2” X 12” Clear | 1.5 – 2.0 | 6 – 9 Months | ||
SP-IL2512-ALK | 2.5” X 12” | 1.5 – 2.5 | 9-12 Months | ||
SP-IL2010-MIN | 2” X 10” | Mineralizer | 0.5 – 1.0 | 4 – 6 Months | |
SP-IL2013-MIN | 2” X 13” | 1.5 – 2.0 | 6 – 9 Months |
* Specifications are nominal, intended for reference only. Filter life depends on operating conditions.
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
4.3: Inline Empty Filters
Empty inline cartridges are blank cartridges. They could be filled and refilled. The cap has grooves for ease of hand tightening and ease of unscrewing. Filter has a built in mesh pad (separator sets) to keep media in place.
Features:
- Compact, easy to use empty inline cartridges
- Make your own cartridge with the media of your choice
- Available in 2” and 2.5” diameter
- Chose from clear transparent shell, or standard white shell
Applications:
- Well water or municipal water supplies
- POU and POE applications
- Residential, commercial, and industrial applications
Materials of Construction:
- White Shell and End Caps: Polypropylene
- Clear Shell: Polycarbonate
- Separator Sets: Polypropylene
- Gasket: EPDM
- Temperature Rating: 40-125°F
Inline Empty Filters
Item | Filter Size* | Empty Shell Color | In/Out Ports |
IL-2006EMPT-CL14F | 2” X 6” | Clear | 1/4” FPT |
IL-2006EMPT-WH14F | White | ||
IL-2010EMPT-CL14F | 2” X 10” | Clear | |
IL-2010EMPT-WH14F | White | ||
IL-2512EMPT-CL14F | 2.5” X 12” | Clear | |
IL-2512EMPT-WH14F | White | ||
IL-2010EMP-SEP-SET | 2” | Inner Separator Set | |
IL-2512EMP-SEP-SET | 2.5” |
* Specifications are nominal, intended for reference only. Filter life depends on operating conditions.
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
4.4: OMNIPURE® K Series Inline Filters
Features:
- Reduces bad tastes, odor and chlorine
Applications:
- Icemakers
- Refrigerators
- Drinking fountains
- Coolers
- Pre & post-filter for reverse osmosis and distilled water
Item | Filter Size | Type | Port Size | Box Qty. |
OMNP-K2301-BB | 2″ X 6″ | 1 MICRON SEDIMENT | 1/4″ FPT | 50 |
OMNP-K2301-JJ | 1 MICRON SEDIMENT | 1/4″ FPT | 50 | |
OMNP-K2351-JJ | 1 MICRON SEDIMENT | 1/4″ JG | 50 | |
OMNP-K2305-BB | 5 MICRON SEDIMENT | 1/4″ FNPT | 50 | |
OMNP-K2305-JJ | 5 MICRON SEDIMENT | 1/4″ JG | 50 | |
OMNP-K2333-BB | GAC T/33 | 1/4″ NPTF | 50 | |
OMNP-K2333-JJ | GAC T/33 | 1/4″ JG | 50 | |
OMNP-K2515-BB | 2″ X 10″ | 1 MICRON SEDIMENT | 1/4″ FPT | 25 |
OMNP-K2520-JJ | 1 MICRON CARBON BLOCK | 25 | ||
OMNP-K2521-BB | CARBON BLOCK | 1/4″ FPT | 25 | |
OMNP-K2521-JJ | CARBON BLOCK | 1/4″ JG | 25 | |
OMNP-K2540-CC | COCONUT SHELL 12X40 | 3/8″ FPT | 25 | |
OMNP-K2540-KK | OCONUT SHELL T/40 | 1/4″ FPT | 25 | |
OMNP-K2551-JJ-SPEC | 3/8″ FPT | 25 | ||
OMNP-K2555-BB | DI RESIN FILTER | 1/4″ FPT | 25 | |
OMNP-K2567-CC | T33, 1/2LB. KDF | 3/8″ FPT | 25 | |
OMNP-K2505-BB | 5 MICRON SEDIMENT | 1/4″ NPTF | 25 | |
OMNP-K2505-JJ | 5 MICRON SEDIMENT | 1/4″ JG | 25 | |
OMNP-K2533-BB | GAC | 25 | ||
OMNP-K2533-JJ | GAC | 1/4″ JG | 25 | |
OMNP-K2533-CC | GAC | 3/8″ NPTF | 25 | |
OMNP-K2533-KK | GAC | 3/8″ JG | 25 | |
OMNP-K2533-SS | GAC | 1/4″ NPTF | 25 | |
OMNP-K2540-BB | COCONUT SHELL GAC | 1/4″ JG, SIDE | 25 | |
OOMNP-K2540-JJ | COCONUT SHELL GAC | 1/4″ NPTF | 25 | |
OMNP-K2540-BB | COCONUT SHELL GAC | 1/4″ JG, SIDE | 25 | |
OMNP-K2540-JJ | COCONUT SHELL GAC | 1/4″ NPTF | 25 | |
OMNP-K2548-BB | CALCITE | 1/4″ JG | 25 | |
OMNP-K2548-JJ | CALCITE | 1/4″ NPTF | 25 | |
OMNP-K2551-BB | 50% CALCITE, 50% GAC | 1/4″ JG | 25 | |
OMNP-K2551-JJ | 50% CALCITE, 50% GAC | 1/4″ NPTF | 25 | |
OMNP-K2556-BB | KDF-55 | 1/4″ JG | 25 | |
OMNP-K2562-BB | MIXED BED DI, NRW-37 | 1/4″ NPTF | 25 | |
OMNP-K2562-JJ | MIXED BED DI, NRW-37 | 1/4″ NPTF | 25 | |
OMNP-K2567-BB | 1/2 LBS. KDF-55, GAC | 1/4″ JG | 25 | |
OMNP-K2585-BB | PHOSPHATE | 1/4″ NPTF | 25 | |
OMNP-K2586-BB | GAC, PHOSPHATE | 1/4″ NPTF | 25 | |
OMNP-K2586-JJ | GAC, PHOSPHATE | 1/4″ NPTF | 25 | |
OMNP-K5505-BB | 2.5″ X 10″ | 5 MICRON SEDIMENT | 1/4″ NPFT | 25 |
OMNP-K5533-BB | GAC | 1/4″ NPFT | 25 | |
OMNP-K5562-BB | MIXED BED DI, NRW-37 | 1/4″ NPFT | 25 | |
OMNP-K5605-BB | 2.5″ X 12″ | 5 MICRON SEDIMENT | 1/4″ JG | 25 |
OMNP-K5605-CC | 5 MICRON SEDIMENT | 3/8″ NPTF | 25 | |
OMNP-K5605-JJ | 5 MICRON SEDIMENT | 1/4″ JG | 25 | |
OMNP-K5605-SS | 5 MICRON SEDIMENT | 1/4″ JG | 25 | |
OMNP-K5633-BB | GAC | 1/4″ NPTF | 25 | |
OMNP-K5633-CC | GAC | 3/8″ NPTF | 25 | |
OMNP-K5633-JJ | GAC | 1/4″ JG | 25 | |
OMNP-K5633-SS | GAC | 1/4″ JG, SIDE | 25 | |
OMNP-K5662-BB | MIXED BED DI, NRW-37 | 1/4″ JG | 25 | |
OMNP-K5662-CC | MIXED BED DI, NRW-37 | 1/4″ JG | 25 | |
OMNP-K5662-JJ | MIXED BED DI, NRW-37 | 1/4″ JG | 25 | |
OMNP-K5662-SS | MIXED BED DI, NRW-37 | 1/4″ JG | 25 | |
OMNP-K5621-KK | 10 Micron sediment | 25 | ||
OMNP-K5628-JJ | CARBON T/28 | 1/4″ JG | 25 | |
OMNP-K5633-KK | GAC T/33 | 3/8″ JG | 25 | |
OMNP-K5648-BB | CALCITE FILTER | 1/4″ FPT | 25 | |
OMNP-K5653-BB | NITRATE SELECT RESIN | 1/4″ FPT | 25 | |
OMNP-K5686-CC | CARBON/PHOSPH | 3/8″ FPT | 25 | |
OMNP-K5686-KK | CARBON/PHOSPH | 3/8″ JG | 25 | |
OMNP-K5733-SS | 2.5″ X 14″ | T/33 GAC | 1/4″ JG, SIDE | 25 |
OMNP-K5767-SS | LBS. KDF-FF,T/33 | 1/4″JG, SIDE | 20 | |
OMNP-K5705-BB | 5 MICRON SEDIMENT | 1/4″ JG | 20 | |
OMNP-K5705-CC | 5 MICRON SEDIMENT | 1/4″ JG | 20 | |
OMNP-K5733-BB | GAC | 1/4″ NPTF | 20 | |
OMNP-K5733-CC | GAC | 3/8″ NPTF | 20 | |
OMNP-K5762-BB | MIXED BED DI, NRW-37 | 1/4″ JG | 20 |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
4.5: OMNIPURE® CL, OC and OMB Series
Omnipure Filter Company offers three series of replacement filter elements for use in systems or as stand-alone units - the OC-Series, the CS-Series and the OMB-Series.
The Slim Line includes all of the engineering features available on the OC-Series in a small, slender profile.
With the highest volume in the industry, the OC-Series filter elements are designed to fit most standard 4-7/8", 9-3/4" and 20" cartridge housings. Omnipure utilizes a spring loading device to compress the media, reducing media migration and ensuring that the water passes properly through the media for optimum filtration. Ask your Omnipure representative about custom formulations and alternative finishing options.
OMNIPURE® CL, OC AND OMB Series
Item | Filter Size | Type | Port Size |
OMNP-CL10HP | 2” X 10” | 10 Micron GAC AND LEAD FILTER | 1/4″ FNPT – CL10HP-BB |
OMNP-CL10PF5 | 5 MICRON SEDIMENT INLINE FILTER | 3/8″ NPT | |
OMNP-CL10ROT33 | INLINE 2.5″ X 10″ T33 GAC FILTER | 1/4″ FPT |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
4.6: OMNIPURE® Q SERIES Quick Change Filters
Features:
- Quick change filter for easy and sanitary filter changes
- One piece design for the cartridge/sump to eliminate leaks
- Wide selection of filter medias for dirt/sediment, bad tastes, odor, chlorine and much more
- Choose the right permanent Q head (with or without valve built in) for your application
Applications:
- Filters for espresso and coffee makers
- Ideal for beverage and food service applications
- Pre and post-filter for RO and distilled water
OMNIPURE® Q SERIES Quick Change Filters
Item | Filter Size* | Type | Box Qty. |
OMNP-Q5501 | 2” X 10” | 1 MICRON SEDIMENT | 20 |
OMNP-Q5505 | 5 MICRON SEDIMENT | 20 | |
OMNP-Q5520 | 1 MICRON CARBON BLOCK | 20 | |
OMNP-Q5533 | T/33 GAC CARIDGE | 20 | |
OMNP-Q5540 | T/33 COCONUT SHELL GAC CARIDGE | 20 | |
OMNP-Q5562 | DI CARIDGE, Q SERIES, NRW-37 | 20 | |
OMNP-Q5567 | T33 GAC & 1/2# KDF | 20 | |
OMNP-Q5505 | 5 MICRON SEDIMENT | 20 | |
OMNP-Q5533 | GAC | 20 | |
OMNP-Q5586 | GAC, PHOSPHATE | 20 | |
OMNP-Q5520 | 1 MICRON CARBON BLOCK | 20 | |
OMNP-Q5501 | 2.5″ X 10″ | T/33 GAC CARIDGE | 20 |
OMNP-Q5505 | 5 MICRON SEDIMENT | 20 | |
OMNP-Q5520 | 1 MICRON CARBON BLOCK | 20 | |
OMNP-Q5533 | T/33 GAC CARIDGE | 20 | |
OMNP-Q5540 | T/33 COCONUT SHELL GAC CARIDGE | 20 | |
OMNP-Q5562 | DI CARIDGE, Q SERIES, NRW-37 | 20 | |
OMNP-Q5567 | T33 GAC & 1/2# KDF | 20 | |
OMNP-Q5605 | 2.5″ X 12″ | 5 MICRON SEDIMENT | 20 |
OMNP-Q5633 | GAC | 20 | |
OMNP-Q5686 | GAC, PHOSPHATE | 20 | |
OMNP-Q5620 | 1 MICRON CARBON BLOCK | 20 | |
OMNP-Q5605 | 2.5″ X 12″ | 5 MICRON SEDIMENT | 20 |
OMNP-Q5633 | T/33 CARBON FILTER | 20 | |
OMNP-Q5640 | COCONUT SHELL CARBON FILTER | 20 | |
OMNP-Q5655 | DI FILTER | 20 | |
OMNP-Q5672 | 50GPD W/FR-CV | 20 | |
OMNP-Q5767 | 2.5″ X 14″ | KDF-55,T/33 | 20 |
OMNP-QVALVED | 1/4″ NPTF | WITH AUTO SHUTOFF VALVE | 1 |
OMNP-QNONVALVED | WITHOUT AUTO SHUTOFF VALVE | 1 |
*Other sizes & types are also available, micron rating is nominal. Call for parts not listed
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.