Section 18
Water Softener Control Valves, Components & Accessories
18.1: Fleck 5600
Features
- User friendly simple mechanical design
- Injector/drain modules containing the brine valve, flow controls, and injector are removable from the valve’s exterior
- Ruggedly-built timer is designed with heavy-duty ⅜" wide plastic gears
- Non-corrosive, UV-resistant, fiber-reinforced polymer valve body
- Economical - small power consuMPTion; kEEps the time & activates the piston/valve mechanics with a single motor
Applications
- Residential
Valve Specifications
| Valve Specifications | Fiber-reinforced polymer |
| Inlet/Outlet | ¾”, 1″ or 1.25″ |
| Cycles | 7 |
Flow Rates (50 PSI) – Valve Alone
| Continuous (15 psi drop) | 20 GPM |
| Peak (25 psi drop) | 26 GPM |
| Cv (flow at 1 psi drop) | 5 |
| Max. backwash (25 psi drop) | 7 GPM |
Regeneration
| Downflow/Upflow | Both |
| Adjustable Cycles | Brine fill only |
| Time Available | 180 minutes per cycle |
Meter Information
| Down-flow/Up-flow | Both |
| Adjustable Cycles | Brine fill only |
| Time Available | 180 minutes per cycle |
Meter Information
| Meter Accuracy | .25 – 15 GPM +/- 5% |
| Meter Capacity Range (gal.) | Standard: 125 – 2,125, Extended: 625 – 10,625 |
Electrical Rating
| 24 v, 110 v, 220 v – 50 Hz, 60 Hz * |
Dimensions
| Distributor Pilot | ¹³⁄₁₆” or 1.05″ O.D. |
| Drain Line | ½” NPTF |
| Injector Brine System | 1600 |
| Brine Line | ⅜” |
| Mounting Base | 2½” – 8 NPSM |
| Height from Top of Tank | 7″ |
Typical Applications
| Water Softener | 6″ – 12″ diameter |
| Filters | 8″ – 10″ diameter |
Additional Information
| Estimated Shipping Weight | Time clock: 5 lbs, Metered valve: 6 lbs. |
| Pressure | Hydrostatic: 300 psi, Working: 20 – 125 psi |
| Temperature | 34º – 110º |
Approvals
| NSF Standard 44 Certified |
| UL registered components |
*24 VAC Pentair Transformers:
115 VAC +/- 20% Input, 24 VAC Output
230 VAC +/- 20% Input, 24 VAC Output
Fleck 5600 Control Valves:
| Item | Description |
| FLK-5600M24 | 5600 Valve, Metered, 24V, Std. Bracket, Specify DLFC & DLFC, #1 |
| FLK-5600M24-L | 5600 Valve, Metered, 24V, “L” Bracket, Specify DLFC & DLFC, #1 |
| FLK-5600M110 | 5600 Valve, Metered, 110V, Std. Bracket, Specify DLFC & DLFC, #1 |
| FLK-5600M110-L | 5600 Valve, Metered, 110V, “L” Bracket, Specify DLFC & DLFC, #1 |
| FLK-5600TC24 | 5600 Valve, 12-Day TC Soft 24V, Std. Bracket, Specify DLFC & DLFC, #1 |
| FLK-5600TC24-L | 5600 Valve, 12-Day TC Soft 24V, “L” Bracket, Specify DLFC & DLFC, #1 |
| FLK-5600TC110 | 5600 Valve, 12-Day TC Soft 110V, Std. Bracket, Specify DLFC & DLFC, #1 |
| FLK-5600TC110-L | 5600 Valve, 12-Day TC Soft 110V, “L” Bracket, Specify DLFC & DLFC, #1 |
| FLK-5600BW24 | 5600 Valve, 12-Day Backwash 24V, Std. Bracket, Specify DLFC |
| FLK-5600BW24-L | 5600 Valve, 12-Day Backwash 24V, “L” Bracket, Specify DLFC |
| FLK-5600BW110 | 5600 Valve, 12-Day Backwash 110V, Std. Bracket, Specify DLFC |
| FLK-5600BW110-L | 5600 Valve, 12-Day Backwash 110V, “L” Bracket, Specify DLFC |
| FLK-5600FA24-L | 5600 Valve, 12-Day TC Iron, 24V, “L” Bracket, Specify DLFC & DLFC |
| FLK-5600FA110-L | 5600 Valve, 12-Day TC Iron, 110V, “L” Bracket, Specify DLFC & DLFC |
Fleck 5600 Accessories:
| Item | Description |
| FLK-13753-02 | Black Cover For 5600 Standard Mech Valve |
| FLK-42345-00 | 2Black Cover For 5600 Standard Mech Valve, Smooth Finish |
| FLK-60226-11 | Black Cover For 5600 “L” Bracket, Top Mount |
| FLK-60040SS | Stainless steel Bypass, ¾” FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-60041SS | Stainless steel Bypass, 1″ FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-60049 | Plastic Bypass, Requires Yoke, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-18706-02 | Plastic Noryl Yoke, ¾” MPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-18706 | Plastic Noryl Yoke, 1″ MPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-41027-01 | Stainless steel Yoke, ¾” FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-42690 | Brass Yoke, ¾” Sweat, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-13708-40 | Brass Yoke, 1″ Sweat, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-19674 | 24Vac Transformer, Us 110V, 9.6Va, 5000/5600SXT/6700/9000/9100/9500 |
| FLK-60040SS | Stainless steel Bypass, ¾” FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| TRSF-110-24-08A | 110V Transformer, 24Vac, 0.8 Amp |
Fleck 5600 Parts & Service Kits:
| Item | Description |
| FLK-60102-00 | Piston Assy, Standard, 4650/5600 |
| FLK-60102-10 | Piston Assy, BW Filter/FEEder, 4650/5600 |
| FFLK-60125 | Seal & Spacer Kit, 5600/5600SXT/6700 & 9000/9100 Upper |
| FLK-60032 | 1600 Brine Valve, 4650/5000/5600/5600SXT/5800/6600/6700 |
| FLK-60384-X | Injector Drain Assy Filter, 4650/5600/5600SXT/6700 – Specify DLFC |
| FLK-60084-XXXX | Injector Drain Assy Soft, 4650/5600/5600SXT/6700 – Specify Injector, DLFC, DLFC |
| FLK-18743 | Timer Motor 120V/60Hz, 1/30 Rpm, 3Va, 0.025 Amp, 3200/4650/5600/9000/9100/9500 |
| FLK-13494 | Timer Motor 24V/60Hz, 1/30 Rpm, 3Va, 0.125 Amp, 3200/4650/5600/9000/9100/9500 |
| FLK-14038 | ¾” Plastic Meter Cap Only, Standard, ¾” To 2″ Valves |
| FLK-60086 | ¾” Plastic Meter Assy, Standard, 5600/9000/9100 |
| FLK-60087 | ¾” Plastic Meter Assy, Extended Range, 5600/9000/9100 |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.2: Fleck 5600SXT
Features
- Large LCD display with 48 hours of internal power backup capacitor
- LCD display alternates betwEEn time of day, volume remaining or days to regeneration, and tank in service (twin tank systems only)
- Compact turbine meter
- Downflow or upflow regeneration cycles
- Continuous flow rate of 20 GPM
Applications
- Residential
Valve Specifications
| Valve Materials | Fiber-reinforced polymer |
| Inlet/Outlet | ¾”, 1″ or 1.25″ |
| Cycles | 5 |
Flow Rates (50 PSI) – Valve Alone
| Continuous (15 psi drop) | 20 GPM |
| Peak (25 psi drop) | 26 GPM |
| Cv (flow at 1 psi drop) | 5 |
| Max. backwash (25 psi drop) | 7 GPM |
Regeneration
| Downflow/Upflow | Both |
| Adjustable Cycles | Brine fill only |
| Time Available | Up tp 199 Minutes per cycle |
Meter Information
| Meter Accuracy | .25 – 15 GPM +/- 5% |
| Meter Capacity Range (gal.) | 1 – 60,000 |
Dimensions
| Distributor Pilot | .8125 or1.05″ Pipe O.D. |
| Drain Line | ½” NPTF |
| Brine Line | 1600 – ⅜” |
| Mounting Base | 2½” – 8 NPSM |
| Height from Top of Tank | 7½” |
Typical Applications
| Water Softener | 6″ – 12″ diameter |
| Iron Filter | 6″ – 10″ diameter |
| Sediment Filter | 6″ – 10″ diameter |
| Carbon Filter | 6″ – 10″ diameter |
| Neutralizing Filter | 6″ – 10″ diameter |
Additional Information
| Injector Brine System | 1600 |
| Electrical Rating | 24v, 50 Hz, 60Hz |
| Max. VA | 8.4 |
| Estimated Shipping Weight | Time clock: 6 lbs, Metered valve: 7 lbs. |
| Pressure | Hydrostatic: 300 psi, Working: 20 – 125 psi |
| Temperature | 34° – 110° F |
Approvals
| UL (powerhead only) |
Fleck 5600SXT Control Valves:
| Item | Description |
| FLK-5600SXT-M | 5600 Valve, Metered, 24V, SXT Controller, Specify DLFC & DLFC, #1 |
| FLK-5600SXT-TC | 5600 Valve, 12-Day TC, 24V, SXT Controller, Specify DLTC & DLFC, #1 |
| FLK-5600SXT-BW | 5600 Valve, 12-Day TC Backwash, 24V, SXT Controller, Specify DLFC |
Fleck 5600SXT Accessories:
| Item | Description |
| FLK-60040SS | Stainless steel Bypass, ¾” FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FFLK-60041SS | Stainless steel Bypass, 1″ FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-60049 | Plastic Bypass, Requires Yoke, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-18706-02 | Plastic Noryl Yoke, ¾” MPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-18706 | Plastic Noryl Yoke, 1″ MPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-41027-01 | Stainless steel Yoke, ¾” FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-41026-01 | Stainless steel Yoke, 1″ FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-42690 | Brass Yoke, ¾” Sweat, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-13708-40 | Brass Yoke, 1″ Sweat, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-19674 | 24Vac Transformer, Us 110V, 9.6Va, 5000/5600SXT/6700/9000/9100/9500 |
| TRSF-110-24-08A | 110V Transformer, 24Vac, 0.8 Amp |
Fleck 5600SXT Parts & Service Kits:
| Item | Description |
| FLK-60102-00 | Piston Assy, Standard, 4650/5600 |
| FLK-60102-10 | Piston Assy, BW Filter/FEEder, 4650/5600 |
| FLK-60125 | Seal & Spacer Kit, 5600/5600SXT/6700 & 9000/9100 Upper |
| FLK-60032 | 1600 Brine Valve, 4650/5000/5600/5600SXT/5800/6600/6700 |
| FLK-60384-X | Injector Drain Assy Filter, 4650/5600/5600SXT/6700 – Specify DLFC |
| FLK-60084-XXXX | Injector Drain Assy Soft, 4650/5600/5600SXT/6700 – Specify Injector, DLFC, DLFC |
| FLK-16944 | Drive Motor 24V/50-60Hz, 2 Rpm, 3Va, 0.125 Amp, 5000/5600SXT/6700 |
| FLK-60626 | ¾” Electronic Plastic Meter Assy, Dual Port 2510/5000/5600SXT/5800/6700/9000/9100 |
| FLK-61672-0201 | Timer Assy, 5600SXT, Square Front, Black |
| FLK-61673-0201 | Timer Assy, 5600SXT, Round Front, Black |
| FLK-PH5600SXT-S | Powerhead Assy 24V, 5600SXT, Square Front |
| FLK-PH5600SXT-R | Powerhead Assy 24V, 5600SXT, Round Front |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.3: Fleck 5800
Features
- Fast positioning reversible 10,000 RPM 12 volt DC drive motor
- Seal and spacer cartridge for easy servicing
- LCD – Backlit display that helps during low light conditions
- Precision cycle positioning using optical sensor
- Soft water refill for better brine saturation and cleaner brine tank
Options
- Up-flow or countercurrent regeneration
- Down-flow or co-current regeneration
- LXT Timer – Easiest to program, only 2 - 4 parameters to program based on filter or softener – Midsize, blue backlit LCD display; Preprogrammed for Time Clock or Meter valve
- SXT Timer – Increased flexibility, set cycle steps – Large, blue backlit LCD display; Ability to change programming: Time Clock or Meter and filter or softener
- XTR Timer – Optimal flexibility, program parameters with ease – 2 Line/16 character LCD backlit display; Programmable auxiliary relay output with normally open and normally closed contaCTS
Valve Specifications
| Valve Materials | Fiber-reinforced polymer |
| Inlet/Outlet | .75″, 1″ or 1.25″ |
| Cycles | 5 |
Flow Rates (50 PSI) – Valve Alone
| Continuous (15 psi drop) | 21 GPM 4,8 m3/h |
| Peak (25 psi drop) | 27 GPM 6,1 m3/h |
| Cv (flow at 1 psi drop) | 5.4 |
| Max. backwash (25 psi drop) | 17 GPM 3,9 m3/h |
Regeneration
| Downflow/Upflow | Both |
| Adjustable Cycles | Yes – SXT and XTR |
| Time Available | LXT: Minutes calculated SXT: 0 – 199 minutes per cycle XTR: 0 – 240 minutes per cycle |
Meter Information
| Meter Accuracy | .25 – 15 GPM +/- 5% |
| Meter Capacity Range (gal.) | LXT: Volume calculated SXT: 1 – 999,900 XTR: 1 – 9,900,000 |
Dimensions
| Distributor Pilot | 1.05″ O.D., 26,7mm |
| Drain Line | 1/2″ O.D. |
| Injector Brine System | 1600 |
| Brine Line | ⅜” |
| Mounting Base | 2½” – 8 NPSM |
| Height from Top of Tank | 9″, 228mm |
Typical Applications
| Water Softener | 6″ – 16″ diameter (limited by maximum injector size) |
| Filter | 8″ – 16″ diameter (based on 10 GPM per sq. ft.) |
Additional Information
| Injector Brine System | 1600 |
| Electrical Rating | 12 Volts DC |
| Estimated Shipping Weight | Time Clock: 7 lbs. Metered Valve: 10 lbs. |
| Pressure | Hydrostatic: 300 psi, Working: 20 – 125 psi |
| Temperature | 34° – 110° F, 1° – 43° C |
Fleck 5800 Control Valves:
| Item | Description |
| FLK-5800LXT | 5800 Valve, LXT Controller, 12Vdc, Specify DLFC & DLFC, #1 |
| FLK-5800SXT | 5800 Valve, SXT Controller, 12Vdc, Specify DLFC & DLFC, #1 |
| FLK-5800XTR2 | 5800 Valve, XTR2 Controller, 12Vdc, Specify DLFC & DLFC, #1 |
Fleck 5800 Accessories:
| Item | Description |
| FLK-61832-00 | Blue/Black Designer Cover For 5800 Valve |
| FLK-61882 | Environmental Cover For 5800 Valve |
| FLK-60040SS | Stainless steel Bypass, ¾” FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-60041SS | Stainless steel Bypass, 1″ FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-60049 | Plastic Bypass, Requires Yoke, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-18706-02 | Plastic Noryl Yoke, ¾” MPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-18706 | Plastic Noryl Yoke, 1″ MPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-41027-01 | Stainless steel Yoke, ¾” FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-41026-01 | Stainless steel Yoke, 1″ FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-42690 | Brass Yoke, ¾” Sweat, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-13708-40 | Brass Yoke, 1″ Sweat, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
Fleck 5800 Parts & Service Kits:
| Item | Description |
| FLK-61837 | Piston And Seal Kit, Down-flow, 5800 |
| FLK-61838 | Piston And Seal Kit, Up-flow, 5800 |
| FLK-60032 | 1600 Brine Valve, 4650/5000/5600/5600SXT/5800/6600/6700 |
| FLK-60705-XX | Drain Line Flow Control Plastic, 1500/2510/5000/5800/8500, Specify Size |
| FLK-60626 | ¾” Electronic Plastic Meter Assy, Dual Port 2510/5000/5600SXT/5800/6700/9000/9100 |
| FLK-61835 | Drive Motor Assy, 5800 |
| FLK-61836 | Panel Gear Assy, 5800 Down-flow/Up-flow |
| FLK-61834 | Timer Assembly, 5800SXT |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.4: Fleck 5812
Features
- Fiber-reinforced polymer valve body for superior strength and durability, non-corrosive, and UV-resistant
- Continuous service flow rate of 45 GPM with a backwash of 35 GPM
- Backwash capability accommodates softener tanks up to 24" and filters up to 24" in diameter
- Fully adjustable 3- or 5-cycle control for efficient and reliable water treatment system
- Time-tested, hydraulically-balanced piston for service and regeneration
Options
- Filter or softener control valves
- Downflow co-current or upflow counter-current regeneration
- Plumbing connections in 3/4" to 1-1/4" NPT, BSP, and sweat
- Fiber-reinforced polymer high-flow bypass valve
- Variable reserve for increased efficiency
Valve Specifications
| Valve Materials | Fiber-reinforced polymer |
| Inlet/Outlet | 3/4″, 1″, or 1-1/4″ NPT/BSP/Sweat |
| Cycles | 5 |
Flow Rates (50 PSI) – Valve Alone
| Continuous (15 psi drop) | 26 GPM 8.2 m3/hr |
| Peak (25 psi drop) | 47 GPM 10.6 m3/hr |
| Cv (flow at 1 psi drop) | 9.4 |
| Max. backwash (25 psi drop) | 28 GPM 6.3 m3/hr |
Regeneration
| Downflow/Upflow | Both |
| Adjustable Cycles | Yes – SXT and XTR2 |
| Time Available | LXT: Minutes calculated SXT: 0 – 199 minutes per cycle XTR2: 0 – 240 minutes per cycle |
Meter Information
| Meter Accuracy | 2 – 40 GPM ± 5% |
| Meter Capacity Range (gal.) | LXT: Volume calculated SXT: 1 – 999,900 XTR2: 1 – 9,900,000 |
Dimensions
| Distributor Pilot | 1.05″ O.D., 26,7mm |
| Drain Line | 3/4″ or 1″ NPTM |
| Injector Brine System | 1600 |
| Brine Line | ⅜” |
| Mounting Base | 2½” – 8 NPSM |
| Height from Top of Tank | 11.3″, 287mm |
Typical Applications
| Water Softener | 8 – 24″ diameter |
| Filter | 8″ – 24″ diameter (based on 10 GPM per sq. ft.) |
Additional Information
| Electrical Rating | 12 Volts DC |
| Estimated Shipping Weight | 11 lbs. |
| Pressure | Hydrostatic: 300 psi, Working: 20 – 125 psi, 1.4 – 8.5 bar |
| Temperature | 34° – 110° F, 1° – 43° C |
Fleck 5812 Control Valves:
| Item | Description |
| FLK-5812SXT | Fleck 5812 HP 1″ Valve, SXT Controller, 12Vdc, Specify DLFC & BLFC, No Bypass |
| FLK-5812XTR2 | Fleck 5812 HP 1″ Valve, XTR2 Controller, Blue/Black Cover,12Vdc, Specify DLFC & BLFC, No Bypass |
Fleck 5812 Accessories:
| Item | Description |
| FLK-61832-01 | Black/Black Designer Cover For 5810/5812 Valve |
| FLK-61882 | Environmental Cover For 5800 Valve |
| FLK-60040SS | Stainless steel Bypass, ¾” FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-60041SS | Stainless steel Bypass, 1″ FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-60049 | Plastic Bypass, Requires Yoke, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-18706-02 | Plastic Noryl Yoke, ¾” MPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-18706 | Plastic Noryl Yoke, 1″ MPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-41027-01 | Stainless steel Yoke, ¾” FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-41026-01 | Stainless steel Yoke, 1″ FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-42690 | Brass Yoke, ¾” Sweat, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-13708-40 | Brass Yoke, 1″ Sweat, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
Fleck 5812 Parts & Service Kits:
| Item | Description |
| FLK-61956-01 | Piston And Seal Kit, Downflow, 5810/5812 |
| FLK-61956-02 | Piston And Seal Kit, Upflow, 5810/5812 |
| FLK-60032 | 1600 Brine Valve, 4650/5000/5600/5600SXT/5800/6600/6700 |
| FLK-60705-XX | Drain Line Flow Control Plastic, 1500/2510/5000/5800/8500, Specify Size |
| FLK-60626 | ¾” Electronic Plastic Meter Assy, Dual Port 2510/5000/5600SXT/5800/6700/9000/9100 |
| FLK-61835 | Drive Motor Assy, 5800 |
| FLK-61957-02SB | Panel Gear Assy, 5810/5812 Donwflow/Upflow |
| FLK-61931-02 | Timer Assembly, 5810/5812 Trx2 |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.5: Fleck 9000
Features
- Fully adjustable 5-cycle control delivers controlled up-flow backwash, down-flow brining, slow rinse, rapid rinse, timed brine refill and down-flow service
- Perfect for light commercial/heavy residential systems that require twin tank conditioning capabilities
- Backwash capacity handles tanks up to 16"
- Choice of 3/4" or 1" meter satisfies a wide range of operational nEEds
- Salt and water savings by using 100% capacity of the tank in service before switching to the second tank
Advanced Features
- Regenerates immediately when needed for continuous soft water
- Regenerates with soft water and keeps system clean for optimum operating efficiency and minimum maintenance
- Innovative second tank quick connection
Valve Specifications
| Valve Materials | Lead-frEE brass |
| Inlet/Outlet | ¾”, 1″ or 1¼” |
| Cycles | 5 |
Flow Rates (50 PSI) – Valve with meter
| Flow Rate | 1″ meter | ¾” meter | ¾” turbine |
| Continuous (15 psi drop) | 21 GPM | 18 GPM | 19 GPM |
| Peak (25 psi drop) | 28 GPM | 24 GPM | 25 GPM |
| Cv (flow at 1 psi drop) | 5.1 | 4.8 | 5 |
| Max. backwash (25 psi drop) | 8.5 GPM | 8.5 GPM | 8.5 GPM |
Regeneration
| Down-flow only | Both |
| Adjustable Cycles | Yes |
| Time Available | SXT:0-199 Minutes per cycle XT: 0-240 minutes per cycle |
Meter Information
| Meter Accuracy | 1″ | .7 – 40 GPM +/- 5% |
| ¾” | .25 – 15 GPM +/- 5% | |
| Meter Capacity Range (gal.) | 1″ | Standard: 310 – 5,270 Extended: 1,550 – 26,350 SXT: 1 – 999,900 XT: 1,000 – 9,900,000 |
| ¾” | Standard: 125 – 2,125 Extended: 625 – 10,625 SXT: 1 – 999,900 XT: 1,000 – 9,900,000 |
Dimensions
| Distributor Pilot | 1.05″ O.D. |
| Drain Line | 1/2″ NPT |
| Injector Brine System | 1610 |
| Brine Line | ⅜” |
| Mounting Base | 2½” – 8 NPSM |
| Height from Top of Tank | 6″ – 16″ diameter |
Typical Applications
| Water Softener | 6″ – 16″ |
Additional Information
| Electrical Rating | 24 v, 110 v, 220v – 50, 60Hz |
| Estimated Shipping Weight | ¾ Meter valve: 19lbs. 1″ Metered valve: 23 lbs |
| Pressure | Hydrostatic: 300 psi Working: 20 – 125 psi |
| Temperature | 34° – 110° F (cold water) 34° – 180° F (hot water) |
Approvals
| NSF Standard 44 Certified | 1 – 4 cu. ft |
*As defined in the U.S. EPA Safe Drinking Water Act product also mEEts California Proposition 65 Standards
Fleck 9000 Control Valves:
| Item | Description |
| FLK-9000M034NP-110 | 9000 Twin Valve Np 12″, ¾” Mech Meter, 110V, Specify DLFC & BLFC |
| FLK-9000M100NP-110 | 9000 Twin Valve Np 16″, 1″ Mech Meter, 110V, Specify DLFC & BLFC |
| FLK-9000M034NP-SXT | 9000 Twin Valve Np 12″, ¾” Turbine Meter, 24V, Specify DLFC & BLFC |
Fleck 9000 Accessories:
| Item | Description |
| FLK-60232-110 | Black Designer Cover 1500/2510/2750/2850/2850S/2900/2900S/9000/9100/9500 |
| FLK-60232-112 | Black Designer Cover, With Left Window 9000/9100/9500 |
| FLK-60040SS | Stainless steel Bypass, ¾” FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-60041SS | Stainless steel Bypass, 1″ FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-60049 | Plastic Bypass, Requires Yoke, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-18706-02 | Plastic Noryl Yoke, ¾” MPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-18706 | Plastic Noryl Yoke, 1″ MPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-41027-01 | Stainless steel Yoke, ¾” FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-41026-01 | Stainless steel Yoke, 1″ FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-42690 | Brass Yoke, ¾” Sweat, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-13708-40 | Brass Yoke, 1″ Sweat, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-19674 | 24Vac Transformer, US 110V, 9.6Va, 5000/5600SXT/6700/9000/9100/9500 |
Fleck 9000 Parts & Service Kit:
| Item | Description |
| FLK-60400 | Piston Assy,9000/9100, Upper |
| FLK-60401 | Piston Assy,9000/9100, Lower |
| FLK-60125 | Seal & Spacer Kit, 5600/5600SXT/6700 & 9000/9100, Upper |
| FLK-60421 | Seal & Spacer Kit 9000/9100 Lower |
| FLK-60350 | 1600 Brine Valve Assy, 8500/9000/9100 |
| FLK-60022-XX | 1600 Brine Line Flow Control BLFC 4650/5000/5600/5600SXT/5800/6700/9000/9100, Specify Size |
| FLK-60385-XXXX | 1600 Plastic Drain Injector, 9000/9100, Specify Size |
| FLK-13494 | Timer Motor 24V/60Hz, 1/30 Rpm, 3Va, 0.125 Amp, 3200/4650/5600/9000/9100/9500 |
| FLK-16169 | Timer Motor,24V, 60Hz 1/15 Rpm, 3Va, 0.125 Amp, 9000/9100/9500 |
| FLK-18743 | Timer Motor 120V/60Hz, 1/30 Rpm, 3Va, 0.025 Amp, 3200/4650/5600/9000/9100/9500 |
| FLK-19170 | Timer Motor,120V, 60Hz 1/15 Rpm, 3Va, 0.25 Amp, 9000/9100/9500 |
| FLK-18737 | Drive Motor, 24V-50/60Hz 1Rpm, 3.5Va, 0.18 Amp, 9000/9100/9500 |
| FLK-18738 | Drive Motor,1204V-50/60Hz 1Rpm, 3.5Va, 0.043 Amp, 9000/9100/9500 |
| FLK-14038 | ¾” Plastic Meter Cap Only, Standard, ¾” To 2″ Valves |
| FLK-60086 | ¾” Plastic Meter Assy, Standard, 5600/9000/9100 |
| FLK-60087 | ¾” Plastic Meter Assy, Extended Range, 5600/9000/9100 |
| FLK-60626 | ¾” Electronic Plastic Meter Assy, Dual Port 2510/5000/5600SXT/5800/6700/9000/9100 |
| FLK-15425 | Meter Cable 13.25″ 9000-3/4″ |
| FLK-15216 | Meter Cable 15.25″, 9000-1″/9100/2850-1.5″/2850S-1.5″/2900-2″/3900-2″ |
| FLK-42777 | SXT Timer Assy, 9000/9100/9500 |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.6: Fleck 9100
Features
- Salt and water savings by using 100% capacity of the tank in service before switching to the second tank
- Regenerates immediately when needed for continuous soft water
- Regenerates with soft water and keeps system clean for optimum operating efficiency and minimum maintenance
- Proven technology and performance
- Proven technology and performance
Applications
- Corrosion-free fiber-reinforced polymer valve body
- Innovative second tank quick connection
- Perfect for light commercial/heavy residential systems that require twin tank conditioning capabilities
Valve Specifications
| Valve Materials | Lead-frEE brass |
| Inlet/Outlet | ¾”, 1″ or 1¼” |
| Cycles | 6 |
Flow Rates (50 PSI) – Valve with meter
| Flow Rate | 1″ meter | ¾” meter | ¾” turbine |
| Continuous (15 psi drop) | 21 GPM | 18 GPM | 19 GPM |
| Peak (25 psi drop) | 28 GPM | 24 GPM | 25 GPM |
| Cv (flow at 1 psi drop) | 5.1 | 4.8 | 5 |
| Max. backwash (25 psi drop) | 8.5 GPM | 8.5 GPM | 8.5 GPM |
Regeneration
| Down-flow only | Both |
| Adjustable Cycles | Yes |
| Time Available | 3200: 82 or 164 minutes total SXT:0-199 Minutes per cycle XT: 0-240 minutes per cycle |
Meter Information
| Meter Accuracy | 1″ | .7 – 40 GPM +/- 5% |
| ¾” | .25 – 15 GPM +/- 5% | |
| Meter Capacity Range (gal.) | 1″ | Standard: 310 – 5,270 Extended: 1,550 – 26,350 SXT: 1 – 999,900 XT: 1,000 – 9,900,000 |
| ¾” | Standard: 125 – 2,125 Extended: 625 – 10,625 SXT: 1 – 999,900 XT: 1,000 – 9,900,000 |
Dimensions
| Distributor Pilot | 1.05″ O.D. |
| Drain Line | 1/2″ NPT |
| Injector Brine System | 1600 |
| Brine Line | ⅜” |
| Mounting Base | 2½” – 8 NPSM |
| Height from Top of Tank | 7³⁄₁₀” diameter |
Typical Applications
| Water Softener | 6″ – 16″ |
Additional Information
| Electrical Rating | 24 v, 110 v, 220v – 50, 60Hz |
| Estimated Shipping Weight | Mechanical valve: 14 – 1/2 lbs. SXT and XT valve: 12 lbs. |
| Pressure | Hydrostatic: 300 psi Working: 20 – 125 psi |
| Temperature | 34° – 110° F (cold water only) |
*As defined in the U.S. EPA Safe Drinking Water Act product also mEEts California Proposition 65 Standards
Fleck 9000 Control Valves:
| Item | Description |
| FLK-9100M034-110 | 9100 Twin Valve 12″, ¾” Mech Meter, 110V, Specify DLFC & BLFC |
| FLK-9100M034-024 | 9100 Twin Valve 12″, ¾” Mech Meter, 24V, Specify DLFC & BLFC |
| FLK-9100M034-SXT | 9100 Twin Valve 12″, ¾” Turbine Meter, 24V, Specify DLFC & BLFC |
| FLK-9100M100-SXT | 9100 Twin Valve 12″, 1″ Turbine Meter, 24V, Specify DLFC & BLFC |
Fleck 9000 Accessories:
| Item | Description |
| FLK-60232-110 | Black Designer Cover 1500/2510/2750/2850/2850S/2900/2900S/9000/9100/9500 |
| FLK-60232-112 | Black Designer Cover, With Left Window 9000/9100/9500 |
| FLK-60425-16 | Crossover Tube Assembly, Up To 16″ Tanks, 9100 |
| FLK-60040SS | Stainless steel Bypass, ¾” FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-60041SS | Stainless steel Bypass, 1″ FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-60049 | Plastic Bypass, Requires Yoke, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-18706-02 | Plastic Noryl Yoke, ¾” MPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-18706 | Plastic Noryl Yoke, 1″ MPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-41027-01 | Stainless steel Yoke, ¾” FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-41026-01 | Stainless steel Yoke, 1″ FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-42690 | Brass Yoke, ¾” Sweat, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-13708-40 | Brass Yoke, 1″ Sweat, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-19674 | 24Vac Transformer, US 110V, 9.6Va, 5000/5600SXT/6700/9000/9100/9500 |
Fleck 9000 Parts & Service Kit:
| Item | Description |
| FLK-60400 | Piston Assy,9000/9100, Upper |
| FLK-60401 | Piston Assy,9000/9100, Lower |
| FLK-60125 | Seal & Spacer Kit, 5600/5600SXT/6700 & 9000/9100, Upper |
| FLK-60421 | Seal & Spacer Kit 9000/9100 Lower |
| FLK-60350 | 1600 Brine Valve Assy, 8500/9000/9100 |
| FLK-60022-XX | 1600 Brine Line Flow Control BLFC 4650/5000/5600/5600SXT/5800/6700/9000/9100, Specify Size |
| FLK-60385-XXXX | 1600 Plastic Drain Injector, 9000/9100, Specify Size |
| FLK-13494 | Timer Motor 24V/60Hz, 1/30 Rpm, 3Va, 0.125 Amp, 3200/4650/5600/9000/9100/9500 |
| FLK-16169 | Timer Motor,24V, 60Hz 1/15 Rpm, 3Va, 0.125 Amp, 9000/9100/9500 |
| FLK-18743 | Timer Motor 120V/60Hz, 1/30 Rpm, 3Va, 0.025 Amp, 3200/4650/5600/9000/9100/9500 |
| FLK-19170 | Timer Motor,120V, 60Hz 1/15 Rpm, 3Va, 0.25 Amp, 9000/9100/9500 |
| FLK-18737 | Drive Motor, 24V-50/60Hz 1Rpm, 3.5Va, 0.18 Amp, 9000/9100/9500 |
| FLK-18738 | Drive Motor,1204V-50/60Hz 1Rpm, 3.5Va, 0.043 Amp, 9000/9100/9500 |
| FLK-14038 | ¾” Plastic Meter Cap Only, Standard, ¾” To 2″ Valves |
| FLK-60086 | ¾” Plastic Meter Assy, Standard, 5600/9000/9100 |
| FLK-60087 | ¾” Plastic Meter Assy, Extended Range, 5600/9000/9100 |
| FLK-60626 | ¾” Electronic Plastic Meter Assy, Dual Port 2510/5000/5600SXT/5800/6700/9000/9100 |
| FLK-15425 | Meter Cable 13.25″ 9000-3/4″ |
| FLK-15216 | Meter Cable 15.25″, 9000-1″/9100/2850-1.5″/2850S-1.5″/2900-2″/3900-2″ |
| FLK-42777 | SXT Timer Assy, 9000/9100/9500 |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.7: Fleck 9500
Features
- Fully adjustable 5-cycle control delivers controlled up-flow backwash, down-flow brining, slow rinse, rapid rinse, timed brine refill and down-flow service
- Easily-adjustable, 5-cycle, down-flow-brining control
- Backwash capability handles up to 24" diameter tanks eliminating excessive, space wasting multiple tank installations
- Rugged, long-life construction features a lead-free brass* valve body
- Total flexibility in meter and timer setting
Advanced Features
- Satisfies operational needs from 310 to 53,125 gallons
- Uses conditioned water for regeneration
- Salt and water savings by using 100% capacity of the tank in service before swiTChing to the second tank
- Regenerates immediately when nEEded for continuous soft water
- Regenerates with soft water and kEEps system clean for optimum operating efficiency and minimum maintenance
Valve Specifications
| Valve Materials | Lead-frEE brass |
| Inlet/Outlet | 1¼” NPTF |
| Cycles | 5 |
Flow Rates (50 PSI Inlet) – Valve Alone
| Continuous (15 psi drop) | 38 GPM |
| Peak (25 psi drop) | 49 GPM |
| Cv (flow at 1 psi drop) | 9.8 |
| Max. backwash (25 psi drop) | 16 GPM |
Regeneration
| Down-flow/Up-flow | Down-flow only |
| Adjustable Cycles | Yes |
| Time Available | Electromechanical: 82 or 164 minutes SXT:0-199 Minutes per cycle XT: 0-240 minutes per cycle |
Meter Information
| Meter Accuracy | 1-½ – 75 GPM |
| Meter Capacity Range (gal.) | Standard: 625 – 10,625 Extended: 3,125 – 53,125 SXT: 1 – 999,900 XT: 1,000 – 9,900,000 |
Dimensions
| Distributor Pilot | 1.5″ pipe I.D. |
| Drain Line | 1″ NPTM |
| Injector Brine System | 1/2″ & ⅜” |
| Brine Line | ⅜” |
| Mounting Base | 4″ – 8 UN |
| Height from Top of Tank | 7-¼” |
Typical Applications
| Water Softener | 10″ – 24″ |
Additional Information
| Electrical Rating | 24 v, 110 v, 220v – 50, 60Hz |
| Max. VA | 8.9 |
| Estimated Shipping Weight | Metered valve: 48 lbs. |
| Pressure | Hydrostatic: 300 psi Working: 20 – 125 psi |
| Temperature | 34° – 110° F |
*As defined in the U.S. EPA Safe Drinking Water Act product also mEEts California Proposition 65 Standards
Fleck 9500 Control Valves:
| Item | Description |
| FLK-9500M150NP-110 | 9500 Twin Valve Np 16″, 1.5″ Mech Meter, 110V, 1600 BV, Specify DLFC & BLFC |
| FLK-9500M150-SXT16 | 9500 Twin Valve 16″, 1.5″ Turbine Meter, 24V, 1600BV, Specify DLFC & BLFC |
| FLK-9500M150-SXT24 | 9500 Twin Valve 24″, 1.5″ Turbine Meter, 24V, 1710BV, Specify DLFC & BLFC |
Fleck 9500 Accessories:
| Item | Description |
| FLK-60232-110 | Black Designer Cover 1500/2510/2750/2850/2850S/2900/2900S/9000/9100/9500 |
| FLK-60232-112 | Black Designer Cover, With Left Window 9000/9100/9500 |
| FLK-60708-XX | Drain Line Flow Control DLFC 1″ FPT X ¾” FPT, Brass, 1-7 GPM Specify Button |
| FLK-60701-XX | Drain Line Flow Control DLFC 1″ FPT X 1″ FPT, Brass, 8-25 GPM Specify Button |
| FLK-19674 | 24Vac Transformer, Us 110V, 9.6Va, 5000/5600SXT/6700/9000/9100/9500 |
Fleck 9500 Parts & Service Kit:
| Item | Description |
| FLK-60108 | Piston Assy, 9500, Upper |
| FLK-60109 | Piston Assy, 9500, Lower |
| FLK-60134-20 | Seal & Spacer Kit, 9500, Upper |
| FLK-60133-20 | Seal & Spacer Kit, 9500, Lower |
| FLK-60037-6XX | 1600 Brine Valve Assy, 9500, Specify Size |
| FLK-60039-XX | 1700 Brine Valve Assy, 9500, Specify Size |
| FLK-60606-XX | 1710 Brine Valve Assy, 9500, Specify Size |
| FLK-60480-XX | 1600 Plastic Drain Injector, 9500, Specify Size |
| FLK-60381-XX | 1700 Brass Drain Injector, 9500, Specify Size |
| FLK-13494 | Timer Motor 24V/60Hz, 1/30 Rpm, 3Va, 0.125 Amp, 3200/4650/5600/9000/9100/9500 |
| FLK-16169 | Timer Motor,24V, 60Hz 1/15 Rpm, 3Va, 0.125 Amp, 9000/9100/9500 |
| FLK-18743 | Timer Motor 120V/60Hz, 1/30 Rpm, 3Va, 0.025 Amp, 3200/4650/5600/9000/9100/9500 |
| FLK-19170 | Timer Motor,120V, 60Hz 1/15 Rpm, 3Va, 0.25 Amp, 9000/9100/9500 |
| FLK-18737 | Drive Motor, 24V-50/60Hz 1Rpm, 3.5Va, 0.18 Amp, 9000/9100/9500 |
| FLK-18738 | Drive Motor,1204V-50/60Hz 1Rpm, 3.5Va, 0.043 Amp, 9000/9100/9500 |
| FLK-14038 | ¾” Plastic Meter Cap Only, Standard, ¾” To 2″ Valves |
| FLK-60610 | 1.5″ Brass Meter Assy, Paddle, Inline , 2850/2850S/9500 |
| FLK-60610-NP | 1.5″ Brass Meter Assy, Paddle, Inline Nickel Plated , 2850/2850S/9500 |
| FLK-60614 | 1.5″ Brass Meter Assy, Electronic, Inline , 2850/2850S/9500 |
| FLK-61560 | 1.5″ Plastic Meter Assy, Electronic, Inline , No Fittings |
| FLK-60626 | ¾” Electronic Plastic Meter Assy, Dual Port 2510/5000/5600SXT/5800/6700/9000/9100 |
| FLK-17744 | Meter Cable 20.75″, 2850/2850S/9500 |
| FLK-19791-XX | Meter Cable Assy, Electronic, Specify Length |
| FLK-42777 | SXT Timer Assy, 9000/9100/9500 |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.8: Fleck 2510
Features
- Fully adjustable, 5-cycle control delivers upflow backwash, downflow brining, slow rinse, rapid rinse, brine refill, and down flow service
- Time-tested, hydraulically-balanced piston, seal and spacer, controls service flow and regeneration
- Excellent flow rates (19 GPM continuous, 24 GPM peak)
- Backwash capacity handles tanks up to 16" diameter for softener, and filter applications
Applications
- Residencial
- Light Commercial
Valve Specifications
| Valve Materials | Fiber-reinforced polymer |
| Inlet/Outlet | ¾”, 1″ 1¼” NPTF |
| Cycles | 5 |
Flow Rates (50 PSI Inlet) – Valve Alone
| Continuous (15 psi drop) | 38 GPM |
| Peak (25 psi drop) | 19 GPM |
| Cv (flow at 1 psi drop) | 4.8 |
| Max. backwash (25 psi drop) | 17 GPM |
Regeneration
| Down-flow/Up-flow | Down-flow only |
| Adjustable Cycles | Yes |
| Time Available | Electromechanical: 82 or 164 minutes SXT:0-199 Minutes per cycle XT: 0-240 minutes per cycle |
Meter Information
| Meter Accuracy | .25 – 15 GPM +/-5% |
| Meter Capacity Range (gal.) | Standard: 125 – 2,125 Extended: 625 – 10,625 SXT: 1 – 999,900 XT: 1,000 – 9,900,000 |
Dimensions
| Distributor Pilot | 1-1/20″ I.D. |
| Drain Line | 1/2″ O.D. |
| Injector Brine System | 1600 |
| Brine Line | ⅜” |
| Mounting Base | 7½” |
| Height from Top of Tank | 7-¼” |
Typical Applications
| Water Softener | 6″ – 16″ diameter (limited by max injector size) | Filter | 8″ – 16″ diameter (based on 10 GPM per sq. ft.) |
Electrical Rating
| Electrical Rating | 24 Vac Pentair transformer: – 115 VAC +/- 20% input, 24 VAC output – 230 VAC +/- 20% input, 24 VAC output |
Additional Information
| Electrical Rating | 24 v, 110 v, 220v – 50, 60Hz |
| Estimated Shipping Weight | Time clock: 7 lbs. Metered valve: 10 lbs. |
| Pressure | Hydrostatic: 300 psi Working: 20 – 125 psi |
| Temperature | 34° – 110° F |
*As defined in the U.S. EPA Safe Drinking Water Act product also mEEts California Proposition 65 Standards
Fleck 2510 Control Valves:
| Item | Description |
| FLK-2510M24 | 2510 Valve, Metered, 24V, Env. Back Plate, Specify DLFC & BLFC |
| FLK-2510M110 | 2510 Valve, Metered, 110V, Env. Back Plate, Specify DLFC & BLFC |
| FLK-2510TC24 | 2510 Valve, 12-Day TC, 24V, Env. Back Plate, Specify DLFC & BLFC |
| FLK-2510TC110 | 2510 Valve, 12-Day TC, 110V, Env. Back Plate, Specify DLFC & BLFC |
| FLK-2510BW24 | 2510 Valve, 12-Day Backwash, 24V, Env. Back Plate, Specify DLFC & BLFC |
| FLK-2510BW110 | 2510 Valve, 12-Day Backwash, 110V, Env. Back Plate, Specify DLFC & BLFC |
| FLK-2510M-sxt | 2510 Valve, Metered, 24V, SXT Controller, Specify DLFC & BLFC |
| FLK-2510TC-sxt | 2510 Valve, 12-Day TC, 24V, SXT Controller, Specify DLFC & BLFC |
| FLK-2510BW-sxt | 2510 Valve, 12-Day Backwash, 24V, SXT Controller, Specify DLFC & BLFC |
| FLK-2510AIO-sxt | 2510 Valve, 12-Day TC Aio, 24V, SXT Controller, Specify DLFC & BLFC |
Fleck 2510 Accessories:
| Item | Description |
| FLK-60232-110 | Black Designer Cover 1500/2510/2750/2850/2850S/2900/2900S/9000/9100/9500 |
| FLK-60219-02 | Black Environmental Cover W/Window 1500/2510/2750/2850/2850S/2900/3150/3900 |
| FLK-60705-XX | Drain Line Flow Control DLFC Plastic, 1-7 GPM Specify Button, 1500/2510/5000/5800/8500 |
| FLK-60706-XX | Drain Line Flow Control DLFC, 9-25 GPM, Qc X ¾”FPT, Specify Button, 1500/2510/5000/5800/8500 |
| FLK-60040SS | Stainless steel Bypass, ¾” FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-60040SS | Stainless steel Bypass, ¾” FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-60041SS | Stainless steel Bypass, 1″ FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-60049 | Plastic Bypass, Requires Yoke, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-18706-02 | Plastic Noryl Yoke, ¾” MPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-18706 | Plastic Noryl Yoke, 1″ MPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-41027-01 | Stainless steel Yoke, ¾” FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-41026-01 | Stainless steel Yoke, 1″ FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-42690 | Brass Yoke, ¾” Sweat, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-13708-40 | Brass Yoke, 1″ Sweat, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-42469 | 24Vac Transformer, Us 110V, 40Va, 1500/2510/2750/2850/2850S/2900/3150/3900 |
| FLK-60049 | Plastic Bypass, Requires Yoke, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-41027-01 | Stainless steel Yoke, ¾” FPT, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
| FLK-42690 | Brass Yoke, ¾” Sweat, 2510/4650/5000/5600/5600SXT/5800/6700/9000/9100 |
Fleck 2510 Parts & Service Kit:
| Item | Description |
| FLK-60400 | Piston Assy,9000/9100, Upper |
| FLK-60401 | Piston Assy,9000/9100, Lower |
| FLK-60090 | Piston Assy, HWBP, 1500/2510 |
| FLK-60121 | Seal & Spacer Kit, 1500/2510/2750 |
| FLK-60029-XX | 1600 Brine Valve, Short Stem, 1500/2510/2750/2850/2850S/2900/2900S, Specify BLFC |
| FLK-60011 | 1650 Brine Valve, 1500/2510/2750/2850/2850S/2900/2900S |
| FLK-60080-XX | 1600 Injector Assembly, Complete, 1500/2510/2750 |
| FLK-60050-23 | Drive Assy, 24V, 50/60Hz, 1500/2510/2750/2850 |
| FLK-60050-21 | Drive Assy, 110V, 50/60Hz, 1500/2510/2750/2850 |
| FLK-60010-XX | 1650 Brine Line Flow Control BLFC, Plastic, Specify Size |
| FLK-42579 | Drive Motor, 24V, 50/60Hz, 6Va, 0.25 Amp, 1500/2510/2750/2850/2850S/2900/2900S Upper |
| FLK-41543 | Drive Motor, 110V, 50/60Hz, 57.5Va, 0.5 Amp, 1500/2510/2750/2850/2850S/2900/2900S Upper |
| FLK-14038 | ¾” Plastic Meter Cap Only, Standard, ¾” To 2″ Valves |
| FLK-60088 | ¾” Plastic Meter Assy, Dual Port, Rt Angle, Standard, 2510 |
| FLK-60089 | ¾” Plastic Meter Assy, Dual Port, Rt Angle, Extended Range, 2510 |
| FLK-60086-50 | ¾” Plastic Meter Assy, Dual Port, Electronic, 2510/56SXT/5000/5800/6700/9000/9100 |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.9: Fleck 2850
Features
- Fully adjustable, 5-cycle control delivers controlled up-flow backwash, down-flow brining and slow rinse, rapid rinse, timed brine refill and down-flow service
- Time-tested hydraulically balanced piston, seal and spacer design to pilot service flow and regeneration
- Solid, lead-frEE brass* valve body for superior strength and durability
- Backwash capacity handles tanks up to 30" diameter
- 1½" top mount control valve ideal for smaller size commercial/industrial applications
Applications
- Consistent brining regardless of salt levels with timed brine refills
- Choice of 7 or 12 day clock, manual or meter
- Continuous flow rate of 51 GPM with a backwash of 49 GPM
- Ideal for most filter applications up to 24"
Valve Specifications
| Valve Materials | Lead-frEE brass* |
| Inlet/Outlet | 1½” NPTF |
| Cycles | 5 |
Flow Rates (50 PSI Inlet) – Valve Alone
| Continuous (15 psi drop) | 51 GPM side mount |
| Peak (25 psi drop) | 66 GPM side mount |
| Cv (flow at 1 psi drop) | 13 – 1/5 |
| Max. backwash (25 psi drop) | 49 GPM |
Meter Information
| Meter Accuracy | 7/10 – 40 GPM +/- 5% (1″) 1-1/2 – 15 GPM +/- 5% (1-1/2″) |
| Meter Capacity Range (gal.) | |
| 1″ Standard | 310 – 5,270 |
| 1″ Extended | 1,550 – 26,350 |
| 1½” Standard | 125 – 2,125 |
| 1½” Extended | 625 – 10,625 |
| 3200NT | 2,900,000 |
| 3214NT | 9,900,000 |
| XT | 1,000 – 9,900,000 |
Regeneration
| Down-flow/Up-flow | Down-flow only |
| Adjustable Cycles | Yes |
| Time Available | Electromechanical 164 minutes SXT: 0-99 Minutes per cycle NXT: 240 minutes per cycle XT: 0-240 minutes per cycle |
Dimensions
| Distributor Pilot | 1-9/10″ O.D. |
| Drain Line | 1″ NPTM |
| Injector Brine System | 1600 & 1650 – ⅜” 1700 – 1/2″ |
| Brine Line | ⅜” & ½” |
| Mounting Base | 4″ – 8 UN |
| Height from Top of Tank | 6½” |
Additional Information
| Electrical Rating | 24 v, 110 v, 220v – 50, 60Hz |
| Max VA | 72 |
| Estimated Shipping Weight | Time clock: 19 lbs. Metered valve: 27 lbs. |
| Pressure | Hydrostatic: 300 psi and Working: 20 – 125 psi |
| Temperature | 34° – 110° F |
*As defined in the U.S. EPA Safe Drinking Water Act product also mEEts California Proposition 65 Standards
Fleck 2850 Control Valves:
| Item | Description |
| FLK-2850M150-110 | 2850 Valve, 1.5″ Mech Meter, 110V, 1650 BV, Specify DLFC & BLFC |
| FLK-2850TC150-110 | 2850 Valve, 1.5″ 12-Day TC Soft, 110V, 1650 BV, Specify DLFC & BLFC |
| FLK-2850BW150-110 | 2850 Valve, 1.5″ 12-Day Backwash, 110V, Specify DLFC |
| FLK-2850M24-sxt | 2850 Valve, 1.5″ Turbine Meter, 24V, SXT Controller, 1650 BV, Specify DLFC & BLFC |
| FLK-2850TC24-sxt | 2850 Valve, 1.5″ 12-Day TC, 24V, SXT Controller, 1650 BV, Specify DLFC & BLFC |
| FLK-2850BW24-sxt | 2850 Valve, 1.5″ 12-Day Backwash, 24V, SXT Controller, Specify DLFC |
Fleck 2850 Accessories:
| Item | Description |
| FLK-60232-110 | Black Designer Cover 1500/2510/2750/2850/2850S/2900/2900S/9000/9100/9500 |
| FLK-60219-02 | Black Environmental Cover W/Window 1500/2510/2750/2850/2850S/2900/3150/3900 |
| FLK-60708-XX | Drain Line Flow Control DLFC 1″ FPT X ¾” FPT, Brass, 1-7 GPM Specify Button |
| FLK-60701-XX | Drain Line Flow Control DLFC 1″ FPT X 1″ FPT, Brass, 8-25 GPM Specify Button |
| FLK-42469 | 24Vac Transformer, Us 110V, 40Va, 1500/2510/2750/2850/2850S/2900/3150/3900 |
Fleck 2850 Parts & Service Kit:
| Item | Description |
| FLK-60105 | Piston Assy, HWBP, 2850 |
| FLK-60114-01 | Piston Assy, NHWBP, 2850 |
| FLK-60129 | Seal & Spacer Kit, 2850 |
| FLK-60029-XX | 1600 Brine Valve, Short Stem, 1500/2510/2750/2850/2850S/2900/2900S, Specify BLFC |
| FLK-60011 | 1650 Brine Valve, 1500/2510/2750/2850/2850S/2900/2900S |
| FLK-60480-XX | 1600 Injector Assembly, Complete, Plastic, 1500/2510/2750/2850/2850S/2900/2900S, Specify GPM |
| FLK-60381-0X | 1700 Injector Assembly, Complete, 2750/2850/2850S/2900/2900S/9500, Specify GPM |
| FLK-60010-XX | 1650 Brine Line Flow Control BLFC, Plastic, Specify Size |
| FLK-60050-23 | Drive Assy, 24V, 50/60Hz, 1500/2510/2750/2850 |
| FLK-60050-21 | Drive Assy, 110V, 50/60Hz, 1500/2510/2750/2850 |
| FLK-42579 | Drive Motor, 24V, 50/60Hz, 6Va, 0.25 Amp, 1500/2510/2750/2850/2850S/2900/2900S Upper |
| FLK-41543 | Drive Motor, 110V, 50/60Hz, 57.5Va, 0.5 Amp, 1500/2510/2750/2850/2850S/2900/2900S Upper |
| FLK-14038 | ¾” Plastic Meter Cap Only, Standard, ¾” To 2″ Valves |
| FLK-60610 | 1.5″ Brass Meter Assy, Paddle, Inline, 2850/2850S/9500 |
| FLK-60610-NP | 1.5″ Brass Meter Assy, Paddle, Inline Nickel Plated, 2850/2850S/9500 |
| FLK-60614 | 1.5″ Brass Meter Assy, Electronic, Inline, 2850/2850S/9500 |
| FLK-61560 | 1.5″ Plastic Meter Assy, Electronic, Inline, No Fittings |
| FLK-17744 | Meter Cable 20.75″, 2850/2850S/9500 |
| FLK-19791-XX | Meter Cable Assy, Electronic, Specify Length |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.10: Fleck 2850S
Features
- Multi-tank system capability
- Fully adjustable 5-cycle control delivers controlled upflow backwash, downflow
brining and slow rinse, rapid rinse, timed brine refill and downflow service - Solid lead-frEE brass* valve body for superior strength and durability
- 1.5" top mount control valve ideal for smaller size
commercial/industrial applications - Consistent brining regardless of salt levels with timed brine refills
Applications
- Choice of 7-or 12-day clock, manual or volume initiated timers
- Continuous service flow rate of 70 GPM with a backwash of 70 GPM
Valve Specifications
| Valve Materials | Lead-frEE brass* |
| Inlet/Outlet | 1½” NPTF |
| Cycles | 5 |
Flow Rates (50 PSI Inlet) – Valve Alone
| Continuous (15 psi drop) | 70 GPM side mount/top mount |
| Peak (25 psi drop) | 90 GPM side mount/top mount |
| Cv (flow at 1 psi drop) | 18 |
| Max. backwash (25 psi drop) | 70 GPM |
Regeneration
| Down-flow/Up-flow | Down-flow only |
| Adjustable Cycles | Yes |
| Time Available | Electromechanical 164 minutes SXT: 0-99 Minutes per cycle NXT: 0-12 minutes per cycle XT: 0-12 minutes per cycle |
Meter Information
| Meter Accuracy | 7/10 – 40 GPM +/- 5% (1″) 1-1/2 – 15 GPM +/- 5% (1-1/2″) |
| Meter Capacity Range (gal.) | |
| 1″ Standard | 310 – 5,270 |
| 1″ Extended | 1,550 – 26,350 |
| 1½” Standard | 625 – 2,125 |
| 1½” Extended | 3,125 – 53,125 |
| 3200NT | 2,900,000 |
| NX, XT | 1,000 – 9,900,000 |
| SXT | 1,000 – 60,000 |
Dimensions
| Distributor Pilot | 1-9/10″ O.D. |
| Drain Line | 1¼” NPTM |
| Injector Brine System | 1600 & 1650 – ⅜” 1700 – 1/2″ |
| Brine Line | ⅜” & ½” |
| Mounting Base | 4″ – 8 UN |
| Height from Top of Tank | 6½” |
Additional Information
| Electrical Rating | 24 v, 110 v, 220v – 50, 60Hz |
| Max VA | 72 |
| Estimated Shipping Weight | Time clock: 19 lbs. Metered valve: 27 lbs. |
| Pressure | Hydrostatic: 300 psi and Working: 20 – 125 psi |
| Temperature | 34° – 110° F (hot) |
Typical Applications
| Water Softener | 14″ – 36″ diameter |
| Iron Filter | 14″ – 30″ diameter |
| Sediment Filter | 14″ – 30″ diameter |
| Carbon Filter | 14″ – 30″ diameter |
| Neutralizing Filter | 14″ – 30″ diameter |
*As defined in the U.S. EPA Safe Drinking Water Act product also mEEts California Proposition 65 Standards
Fleck 2850S Control Valves:
| Item | Description |
| FLK-2850SM150-110 | 2850S Valve, 1.5″ Mech Meter, 110V, 1650 BV, Specify DLFC & BLFC |
| FLK-2850STC150-110 | 2850S Valve, 1.5″ 12-Day TC Soft, 110V, 1650 BV, Specify DLFC & BLFC |
| FLK-2850SBW150-110 | 2850S Valve, 1.5″ 12-Day Backwash, 110V, Specify DLFC |
| FLK-2850SM24-sxt | 2850S Valve, 1.5″ Turbine Meter, 24V, SXT Controller, 1650 BV, Specify DLFC & BLFC |
| FLK-2850STC24-sxt | 2850S Valve, 1.5″ 12-Day TC, 24V, SXT Controller, 1650 BV, Specify DLFC & BLFC |
| FLK-2850BW24-sxt | 2850S Valve, 1.5″ 12-Day Backwash, 24V, SXT Controller, Specify DLFC |
Fleck 2850S Accessories:
| Item | Description |
| FLK-60232-110 | Black Designer Cover 1500/2510/2750/2850/2850S/2900/2900S/9000/9100/9500 |
| FLK-60219-02 | Black Environmental Cover W/Window 1500/2510/2750/2850/2850S/2900/3150/3900 |
| FLK-60708-XX | Drain Line Flow Control DLFC 1″ FPT X ¾” FPT, Brass, 1-7 GPM Specify Button |
| FLK-60701-XX | Drain Line Flow Control DLFC 1″ FPT X 1″ FPT, Brass, 8-25 GPM Specify Button |
| FLK-42469 | 24Vac Transformer, Us 110V, 40Va, 1500/2510/2750/2850/2850S/2900/3150/3900 |
Fleck 2850S Parts & Service Kit:
| Item | Description |
| FLK-61630-00 | Piston Assy, HWBP, 2850S |
| FLK-61631-00 | Piston Assy Conversion, NHWBP, 2850S |
| FLK-61632 | Seal & Spacer Kit, 2850S |
| FLK-60029-XX | 1600 Brine Valve, Short Stem, 1500/2510/2750/2850/2850S/2900/2900S, Specify BLFC |
| FLK-60011 | 1650 Brine Valve, 1500/2510/2750/2850/2850S/2900/2900S |
| FLK-60480-XX | 1600 Injector Assembly, Complete, Plastic, 1500/2510/2750/2850/2850S/2900/2900S, Specify GPM |
| FLK-60381-0X | 1700 Injector Assembly, Complete, 2750/2850/2850S/2900/2900S/9500, Specify GPM |
| FLK-60010-XX | 1650 Brine Line Flow Control BLFC, Plastic, Specify Size |
| FLK-60050-25 | Drive Assy, 110V, 2850S |
| FLK-60050-26 | Drive Assy, 24V, 50/60Hz, 2850S |
| FLK-42579 | Drive Motor, 24V, 50/60Hz, 6Va, 0.25 Amp, 1500/2510/2750/2850/2850S/2900/2900S Upper |
| FLK-41543 | Drive Motor, 110V, 50/60Hz, 57.5Va, 0.5 Amp, 1500/2510/2750/2850/2850S/2900/2900S Upper |
| FLK-14038 | ¾” Plastic Meter Cap Only, Standard, ¾” To 2″ Valves |
| FLK-60610 | 1.5″ Brass Meter Assy, Paddle, Inline, 2850/2850S/9500 |
| FLK-60610-NP | 1.5″ Brass Meter Assy, Paddle, Inline Nickel Plated, 2850/2850S/9500 |
| FLK-60614 | 1.5″ Brass Meter Assy, Electronic, Inline, 2850/2850S/9500 |
| FLK-61560 | 1.5″ Plastic Meter Assy, Electronic, Inline, No Fittings |
| FLK-17744 | Meter Cable 20.75″, 2850/2850S/9500 |
| FLK-19791-XX | Meter Cable Assy, Electronic, Specify Length |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.11: Fleck 2900
Features
- Incorporates 2 time-tested hydraulically balanced pistons to independently pilot service flow and regeneration
- Brings great performance and versatility to commercial/industrial applications
- For use with the single or multiple tank systems
- Backwashes softener tanks up to 30˝ diameter
- Continuous flow rate of 106 GPM
Applications
- Available with 7 or 12 day timer or meter to control regeneration
- Lead-free brass valve body for superior strength and durability
Valve Specifications
| Valve Materials | Lead-frEE brass* |
| Inlet/Outlet | 2″ |
| Cycles | 5 |
Flow Rates (50 PSI Inlet) – Valve Alone
| Continuous (15 psi drop) | 108 GPM side mount |
| Peak (25 psi drop) | 140 GPM side mount |
| Cv (flow at 1 psi drop) | 27.5 |
| Max. backwash (25 psi drop) | 25 GPM |
Regeneration
| Down-flow/Up-flow | Both |
| Adjustable Cycles | Yes |
| Time Available | Electromechanical 164 minutes ET: 1 – 999.9 Minutes per cycle Systemax: 0 – 999.9 minutes |
Meter Information
| Meter Accuracy | 3 – 150 GPM +/- 5% (1″) |
| Meter Capacity Range (gal.) | Standard : 1,250 – 21,250 Extended: 6,250 – 106,250 ET: 0 – 999,999,999 Systemax: 1, – 99,999,999 |
Dimensions
| Distributor Pilot | 1-9″ O.D.(1.5″ pipe) |
| Drain Line | ¾” NPTM |
| Brine Line | ⅜” & ½” |
| Mounting Base | 4″ – 8 UN |
| Height from Top of Tank | 12" |
Typical Applications
| Water Softener | 14" – 30" diameter |
| Iron Filter | 14" – 21" diameter |
| Sediment Filter | 14" – 21" diameter |
| Carbon Filter | 14″ – 21″ diameter |
| Neutralizing Filter | 14″ – 21″ diameter |
Additional Information
| Injector Brine System | 1600 & 1650 – ⅜", 170 – ½" |
| Electrical Rating | 24 v, 110 v, 220v – 50, 60Hz |
| Max VA | 143 |
| Estimated Shipping Weight | Time clock: 33 lbs. Metered valve: 40 lbs. |
| Pressure | Hydrostatic: 300 psi and Working: 20 – 125 psi |
| Temperature | 34° – 110° F |
*As defined in the U.S. EPA Safe Drinking Water Act product also mEEts California Proposition 65 Standards
Fleck 2900 Control Valves:
| Item | Description |
| FLK-2900M200-110 | 2900 Valve, 2″ Mech Meter, 110V, 1710 BV, Specify DLFC & BLFC |
| FLK-2900TC200-110 | 2900 Valve, 2″ 12-Day TC Soft, 110V, 1710 BV, Specify DLFC & BLFC |
| FLK-2900BW200-110 | 2900 Valve, 2″ 12-Day Backwash, 110V, Specify DLFC |
| FLK-2900M24-NXT | 2900 Valve, 2″ Turbine Meter, 24V, NXT Controller, 1710 BV, Specify DLFC & BLFC |
| FLK-2900M24-NXT-NO | 2900 Valve, 2″ Turbine Meter, 24V, NXT Controller, No Hard Water Bp, 1710 BV, Specify DLFC & BLFC |
| FLK-2900TC24-NXT | 2900 Valve, 2″ 12-Day TC, 24V, NXT Controller, 1710 BV, Specify DLFC & BLFC |
| FLK-2900BW24-NXT | 2900 Valve, 2″ 12-Day Backwash, 24V, NXT Controller, Specify DLFC |
Fleck 2900 Accessories:
| Item | Description |
| FLK-60232-110 | Black Designer Cover 1500/2510/2750/2850/2850S/2900/2900S/9000/9100/9500 |
| FLK-60219-02 | Black Environmental Cover W/Window 1500/2510/2750/2850/2850S/2900/3150/3900 |
| FLK-60708-XX | Drain Line Flow Control DLFC 1″ FPT X ¾” FPT, Brass, 1-7 GPM Specify Button |
| FLK-60701-XX | Drain Line Flow Control DLFC 1″ FPT X 1″ FPT, Brass, 8-25 GPM Specify Button |
| FLK-42469 | 24Vac Transformer, Us 110V, 40Va, 1500/2510/2750/2850/2850S/2900/3150/3900 |
Fleck 2900 Parts & Service Kit:
| Item | Description |
| FLK-60103 | Piston Assy, HWBP, 2900 Lower, 2900S |
| FLK-60104 | Piston Assy, NHWBP, 2900 Lower, 2900S |
| FLK-60090-HF | Piston Assy, Softener Df, 2750/2900 Upper |
| FLK-60128 | Seal & Spacer Kit, 2900/2900S Lower |
| FLK-60121 | Seal & Spacer Kit, 1500/2510/2750/2900 Upper |
| FLK-60011 | 1650 Brine Valve, 1500/2510/2750/2850/2850S/2900/2900S |
| FLK-60034-XX | 1700 Brine Valve, 2750/2850/2850S/2900/2900S |
| FLK-60381-0X | 1700 Injector Assembly, Complete, 2750/2850/2850S/2900/2900S/9500, Specify GPM |
| FLK-60010-XX | 1650 Brine Line Flow Control BLFC, Plastic, Specify Size |
| FLK-60052-21 | Drive Assy, 110V, 50/60Hz, 2900/2900S Upper |
| FLK-60052-217 | Drive Assy, 110V, 50/60Hz, 2900/2900S Upper, System 7 |
| FLK-60055-53 | Drive Assy, 24V, 50/60Hz, 2900/2900S Lower |
| FLK-60055-51 | Drive Assy, 110V, 50/60Hz, 2900/2900S Lower |
| FLK-60056-51 | Drive Assy, 110V, 50/60Hz, 2900/2900S Lower, System 7 Lead |
| FLK-60056-61 | Drive Assy, 110V, 50/60Hz, 2900/2900S Lower, System 7 Lag |
| FLK-42579 | Drive Motor, 24V, 50/60Hz, 6Va, 0.25 Amp, 1500/2510/2750/2850/2850S/2900/2900S Upper |
| FLK-41543 | Drive Motor, 110V, 50/60Hz, 57.5Va, 0.5 Amp, 1500/2510/2750/2850/2850S/2900/2900S Upper |
| FLK-42580 | Drive Motor, 24V, 50/60Hz, 6Va, 0.25 Amp, 2900 Lower |
| FLK-40387 | Drive Motor, 110V, 50/60Hz, 51Va, 0.5 Amp, 2900 Lower |
| FLK-14038 | ¾” Plastic Meter Cap Only, Standard, ¾” To 2″ Valves |
| FLK-60393 | 2″ Brass Meter Assy, Paddle, Inline, 2900/2900S/3150 |
| FLK-60394 | 2″ Brass Meter Assy, Paddle, Inline, 2900/2900S/3150, Extended Range |
| FLK-60625-01 | 2″ Plastic Meter Assy, Electronic, Inline, Brass Nipples, 2900/2900S |
| FLK-60621-01 | 2″ Plastic Meter Assy, Electronic, Inline, Brass Nipples, 2900/2900S, Extended Range |
| FLK-15216 | Meter Cable 15.25″, 2900/2900S/3900 |
| FLK-19121-05 | Meter Cable Assy, Electronic, 2.3’, 1500/2500/2510/2700/2750/2850/2900/2900S/9000/9500 |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.12: Fleck 2900S
Features
- Incorporates 2 time-tested, hydraulically-balanced pistons to independently pilot service flow and regeneration
- For use with single or multiple tank systems
- Backwashes softener tanks up to 36" diameter
- Continuous flow rate of 106 GPM
- Lead-frEE brass* valve body for superior strength and durability
Applications
- Meter delayed or immediate initiated regeneration
- No hard water bypass
- Service valve operator, Auxiliary switches, and/or Up-flow regeneration
- Hot water up to 180°F for any filter or 1600 brine system or metered control valve
- Hot water up to 150°F for any 1700 brine system or metered control valve
Valve Specifications
| Valve Materials | Lead-frEE brass* |
| Inlet/Outlet | 2″ |
| Cycles | 5 |
Flow Rates (50 PSI Inlet) – Valve Alone
| Regeneration direction Treated water regeneration |
no |
Down-flow Yes |
| Continuous (15 psi drop) | 106 | |
| Peak (25 psi drop) | 140 | |
| Cv (flow at 1 psi drop) | 27.5 | |
| Max. backwash (25 psi drop) | 36 | |
Regeneration
| Down-flow/Up-flow | Both |
| Adjustable Cycles | Yes |
| Time Available | Electromechanical 164 minutes 3200NXT: 240 minutes per cycle 3214NXT: 240 minutes per cycle XT: 240 minutes per cycle |
Meter Information
| Meter Accuracy | 3 – 150 GPM +/- 5% (1″) |
| Meter Capacity Range (gal.) | Standard : 1,250 – 21,250 3200NXT: 9,900,000 3214NXT: 9,900,000 XT: 9,900,000 |
Dimensions
| Distributor Pilot | 1.5″ pipe I.D. |
| Drain Line | 1″ NPTM |
| Brine Line | 1600 & 1650 – ⅜” 1700 & 1710 – ½” |
| Mounting Base | 4″ – 8 UN |
| Height from Top of Tank | 12" |
Additional Information
| Electrical Rating | 24 v, 110 v, 220v – 50, 60Hz |
| Estimated Shipping Weight | Time clock: 33 lbs. Metered valve: 40 lbs. |
| Pressure | Hydrostatic: 300 psi and Working: 20 – 125 psi |
| Temperature | 34° – 110° F |
Typical Applications
| Water Softener | 14" – 36" diameter |
| Filter | 14" – 30" diameter |
*As defined in the U.S. EPA Safe Drinking Water Act product also mEEts California Proposition 65 Standards
Fleck 2900S Control Valves:
| Item | Description |
| FLK-2900SM200-110 | 2900S Valve, 2″ Mech Meter, 110V, 1710 BV, Specify DLFC & BLFC |
| FLK-2900STC200-110 | 2900S Valve, 2″ 12-Day TC Soft, 110V, 1710 BV, Specify DLFC & BLFC |
| FLK-2900SBW200-110 | 2900S Valve, 2″ 12-Day Backwash, 110V, Specify DLFC |
| FLK-2900SM24-NXT | 2900S Valve, 2″ Turbine Meter, 24V, NXT Controller, 1710 BV, Specify DLFC & BLFC |
| FLK-2900SM24-NXT-NO | 2900S Valve, 2″ Turbine Meter, 24V, NXT Controller, No Hard Water Bp, 1710 BV, Specify DLFC & BLFC |
| FLK-2900STC24-NXT | 2900S Valve, 2″ 12-Day TC, 24V, NXT Controller, 1710 BV, Specify DLFC & BLFC |
| FLK-2900SBW24-NXT | 2900S Valve, 2″ 12-Day Backwash, 24V, NXT Controller, Specify DLFC |
Fleck 2900S Parts & Service Kit:
| Item | Description |
| FLK-60104 | Piston Assy, Nhwbp, 2900 Lower, 2900S |
| FLK-61550 | Piston Assy, Hwbp, 2900 Lower, 2900S |
| FLK-61540 | Piston Assy, 2900S Upper |
| FLK-61530 | Seal & Spacer Kit, 2900S Upper |
| FLK-60128 | Seal & Spacer Kit, 2900/2900S Lower |
| FLK-60011 | 1650 Brine Valve, 1500/2510/2750/2850/2850S/2900/2900S |
| FLK-60034-XX | 1700 Brine Valve, 2750/2850/2850S/2900/2900S |
| FLK-60381-0X | 1700 Injector Assembly, Complete, 2750/2850/2850S/2900/2900S/9500, Specify GPM |
| FLK-60010-XX | 1650 Brine Line Flow Control BLFC, Plastic, Specify Size |
| FLK-60052-21 | Drive Assy, 110V, 50/60Hz, 2900/2900S Upper |
| FLK-60052-217 | Drive Assy, 110V, 50/60Hz, 2900/2900S Upper, System 7 |
| FLK-60055-53 | Drive Assy, 24V, 50/60Hz, 2900/2900S Lower |
| FLK-60055-51 | Drive Assy, 110V, 50/60Hz, 2900/2900S Lower |
| FLK-60056-51 | Drive Assy, 110V, 50/60Hz, 2900/2900S Lower, System 7 Lead |
| FLK-60056-61 | Drive Assy, 110V, 50/60Hz, 2900/2900S Lower, System 7 Lag |
| FLK-42579 | Drive Motor, 24V, 50/60Hz, 6Va, 0.25 Amp, 1500/2510/2750/2850/2850S/2900/2900S Upper |
| FLK-41543 | Drive Motor, 110V, 50/60Hz, 57.5Va, 0.5 Amp, 1500/2510/2750/2850/2850S/2900/2900S Upper |
| FLK-42580 | Drive Motor, 24V, 50/60Hz, 6Va, 0.25 Amp, 2900 Lower |
| FLK-40387 | Drive Motor, 110V, 50/60Hz, 51Va, 0.5 Amp, 2900 Lower |
| FLK-14038 | ¾” Plastic Meter Cap Only, Standard, ¾” To 2″ Valves |
| FLK-60393 | 2″ Brass Meter Assy, Paddle, Inline, 2900/2900S/3150 |
| FLK-60394 | 2″ Brass Meter Assy, Paddle, Inline, 2900/2900S/3150, Extended Range |
| FLK-60625-01 | 2″ Plastic Meter Assy, Electronic, Inline, Brass Nipples, 2900/2900S |
| FLK-60621-01 | 2″ Plastic Meter Assy, Electronic, Inline, Brass Nipples, 2900/2900S, Extended Range |
| FLK-15216 | Meter Cable 15.25″, 2900/2900S/3900 |
| FLK-19121-05 | Meter Cable Assy, Electronic, 2.3’, 1500/2500/2510/2700/2750/2850/2900/2900S/9000/9500 |
Fleck 2900S Accessories:
| Item | Description |
| FLK-60219-02 | Black Environmental Cover W/Window 1500/2510/2750/2850/2850S/2900/3150/3900 |
| FLK-60240-02 | Black Environmental Cover, 3900 Upper |
| FLK-60240-22 | Black Environmental Cover, 3900 Lower |
| FLK-60711-1XX | Drain Line Flow Control DLFC 2″, Brass, 1 Hole <25 GPM, Specify GPM |
| FLK-60711-2XX | Drain Line Flow Control DLFC 2″, Brass, 2 Hole <55 GPM, Specify GPM |
| FLK-60711-4XX | Drain Line Flow Control DLFC 2″, Brass, 4 Hole <50 GPM, Specify GPM |
| FLK-42469 | 24Vac Transformer, Us 110V, 40Va, 1500/2510/2750/2850/2850S/2900/3150/3900 |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.13: Fleck 3900
Features
- Lead-free brass valve body for superior strength and durability
- Continuous service flow rate of 250 GPM with a backwash of 100 GPM
- Backwash capability accommodates softener tanks up to 63" and filter up to 42" in diameter
- Fully adjustable 3- or 5-cycle control for efficient and reliable water treatment system
- Designed for single or multiple tank systems
Options:
- Filter or softener control valves
- Downflow co-current or upflow counter-current regeneration
- No hard water bypass piston
- Brine cam auxiliary switch
- Electromechanical timer auxiliary switch
Valve Specifications
| Valve Materials | Lead-frEE brass* |
| Inlet/Outlet | 3″ NPT |
| Cycles | 5 |
Flow Rates (50 PSI Inlet) – Valve Alone
| Flow rate (50 psi inlet) | Top mount |
| Continuous (15 psi drop) | 250 GPM |
| Peak (25 psi drop) | 325 GPM |
| Cv (flow at 1 psi drop) | 65 |
| Max. backwash (25 psi drop) | 100 GPM |
Regeneration
| Down-flow/Up-flow | Both |
| Adjustable Cycles | Yes |
| Time Available | Electromechanical 164 minutes 3200NXT: 240 minutes per cycle 3214NXT: 240 minutes per cycle XT: 240 minutes per cycle |
Meter Information
| Meter Accuracy | 7 – 300 GPM +/- 5% |
| Meter Capacity Range (gal.) | Standard : 3,750 – 63,750 Extended: 18,750 – 318,750 3200NXT: 9,900,000 3214NXT: 9,900,000 XT: 9,900,000 |
Dimensions
| Distributor Pilot | 3″ O.D. |
| Drain Line | 2″ NPTF |
| Injector Brine System | 1″ |
| Mounting Base | Top: 6″-8 threaded or flanged |
| Height from Top of Tank | 15" |
Additional Information
| Electrical Rating | 24 v, 110 v, 220v – 50, 60Hz |
| Estimated Shipping Weight | Time clock: 33 lbs. Metered valve: 40 lbs. |
| Pressure | Hydrostatic: 300 psi and Working: 20 – 125 psi |
| Temperature | 34° – 110° F |
*As defined in the U.S. EPA Safe Drinking Water Act product also mEEts California Proposition 65 Standards
Fleck 3900 Control Valves:
| Item | Description |
| FLK-3900M24-NXT | 3900 Valve, 3″ Turbine Meter, 24V, NXT Controller, 1800 Bv, Specify DLFC & BLFC |
| FLK-3900M24-NXT-NO | 3900 Valve, 3″ Turbine Meter, 24V, NXT Controller, No Hard Water Bp, 1800 Bv, Specify DLFC & BLFC |
| FLK-3900TC24-NXT | 3900 Valve, 3″ 12-Day TC, 24V, NXT Controller, 1800 Bv, Specify DLFC & BLFC |
| FLK-3900BW24-NXT | 3900 Valve, 3″ 12-Day Backwash, 24V, NXT Controller, Specify DLFC |
Fleck 3900 Accessories:
| Item | Description |
| FLK-60232-110 | Black Designer Cover 1500/2510/2750/2850/2850S/2900/2900S/9000/9100/9500 |
| FLK-60219-02 | Black Environmental Cover W/Window 1500/2510/2750/2850/2850S/2900/3150/3900 |
| FLK-60708-XX | Drain Line Flow Control DLFC 1″ FPT X ¾” FPT, Brass, 1-7 GPM Specify Button |
| FLK-60701-XX | Drain Line Flow Control DLFC 1″ FPT X 1″ FPT, Brass, 8-25 GPM Specify Button |
| FLK-42469 | 24Vac Transformer, Us 110V, 40Va, 1500/2510/2750/2850/2850S/2900/3150/3900 |
Fleck 3900 Parts & Service Kit:
| Item | Description |
| FLK-60103 | Piston Assy, HWBP, 2900 Lower, 2900S |
| FLK-60104 | Piston Assy, NHWBP, 2900 Lower, 2900S |
| FLK-60090-HF | Piston Assy, Softener Df, 2750/2900 Upper |
| FLK-60128 | Seal & Spacer Kit, 2900/2900S Lower |
| FLK-60121 | Seal & Spacer Kit, 1500/2510/2750/2900 Upper |
| FLK-60011 | 1650 Brine Valve, 1500/2510/2750/2850/2850S/2900/2900S |
| FLK-60034-XX | 1700 Brine Valve, 2750/2850/2850S/2900/2900S |
| FLK-60381-0X | 1700 Injector Assembly, Complete, 2750/2850/2850S/2900/2900S/9500, Specify GPM |
| FLK-60010-XX | 1650 Brine Line Flow Control BLFC, Plastic, Specify Size |
| FLK-60052-21 | Drive Assy, 110V, 50/60Hz, 2900/2900S Upper |
| FLK-60052-217 | Drive Assy, 110V, 50/60Hz, 2900/2900S Upper, System 7 |
| FLK-60055-53 | Drive Assy, 24V, 50/60Hz, 2900/2900S Lower |
| FLK-60055-51 | Drive Assy, 110V, 50/60Hz, 2900/2900S Lower |
| FLK-60056-51 | Drive Assy, 110V, 50/60Hz, 2900/2900S Lower, System 7 Lead |
| FLK-60056-61 | Drive Assy, 110V, 50/60Hz, 2900/2900S Lower, System 7 Lag |
| FLK-42579 | Drive Motor, 24V, 50/60Hz, 6Va, 0.25 Amp, 1500/2510/2750/2850/2850S/2900/2900S Upper |
| FLK-41543 | Drive Motor, 110V, 50/60Hz, 57.5Va, 0.5 Amp, 1500/2510/2750/2850/2850S/2900/2900S Upper |
| FLK-42580 | Drive Motor, 24V, 50/60Hz, 6Va, 0.25 Amp, 2900 Lower |
| FLK-40387 | Drive Motor, 110V, 50/60Hz, 51Va, 0.5 Amp, 2900 Lower |
| FLK-14038 | ¾” Plastic Meter Cap Only, Standard, ¾” To 2″ Valves |
| FLK-60393 | 2″ Brass Meter Assy, Paddle, Inline, 2900/2900S/3150 |
| FLK-60394 | 2″ Brass Meter Assy, Paddle, Inline, 2900/2900S/3150, Extended Range |
| FLK-60625-01 | 2″ Plastic Meter Assy, Electronic, Inline, Brass Nipples, 2900/2900S |
| FLK-60621-01 | 2″ Plastic Meter Assy, Electronic, Inline, Brass Nipples, 2900/2900S, Extended Range |
| FLK-15216 | Meter Cable 15.25″, 2900/2900S/3900 |
| FLK-19121-05 | Meter Cable Assy, Electronic, 2.3’, 1500/2500/2510/2700/2750/2850/2900/2900S/9000/9500 |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.14: CSI Signature 3
Features
- Regeneration Type is on Demand
- Filter Capacity is 3 or 5-cycle
- Treated water refill with pre-brine option
- Programming ease and options increase efficiency, save salt and water
- Strong, durable Noryl valve body, weather insect resistant one-piece slide cover
Advanced Features
- Simple set up through bluetooth app
- Proprietary two valve bypass with 1 mnpt connections
- 9v battery back-up
- Will motor to a drain line shut off position if power fails during regeneration
- Limited 7 year warranty
Valve Specifications
| Valve Materials | Noryl* |
| Inlet/Outlet | 1″ NPT |
| Cycles | 5 |
Flow Rates (50 PSI Inlet) – Valve Alone
| Continuous (15 psi drop) | 21 gpm |
| Peak (25 psi drop) | 27 gpm |
| CV (flow at 1 psi drop) | 5.4 |
| Max. backwash (25 psi drop) | 17 GPM |
Regeneration
| Down-flow/Up-flow | Downflow |
| Adjustable Cycles | Yes |
| Time Available | 99 minutes per cycle |
Meter Information
| Meter Accuracy Range | .25 – 15 gpm +/- 5% |
| Meter Capacity Range (gal.) | 1 – 9,999 |
*Noryl is a registered trademark of General Electric Company
Dimensions
| Distributor Pilot | 1.050 O.D. |
| Drain Line | 1/2 NPT Q.C. |
| Brine Line | 3/8″ |
| Mounting Base | 2-1/2 – 8 NPSM |
| Height From Top of Tank | 7.7 |
Typical Applications
| Water Softener | 6 – 16 Diameter up to 4 ft3 Capacity |
| Iron Filter | 6 – 16 Diameter |
| Sediment Filter | 6 – 16 Diameter |
| Carbon Filter | 6 – 16 Diameter |
| Neutralizing Filter | 6 – 16 Diameter |
Additional Information
| Electrical Rating | 2 VDC |
| Pressure | 6 – 16 Diameter |
| Sediment Filter | Hydrostatic: 300 psi Working: 20 – 125 psi |
| Temperature | 34º- 110ºF |
CSI Signature 3 Control Valve and Accessories:
| Item | Description |
| CSI-SG3 | Signature 3 Control Valve |
| CSI-SG3-01 | Sidekick Signature 3 Control Valve |
| ACSI-SG3-BW | Signature 3 Backwash Control Valve |
CSI SG3 Accessories
| Item | Description |
| CSI-OXY-03 | Ozone Generator And Electronic Air Dryer |
| CSI-R2014 | Wireless Salt Level Sensor |
| CSI-R2014-EXT | Salt Level Sensor With Paddle Extender (Up To 40″ Brine Tank) |
CSI SG3 Parts & Service Kits:
| Item | Description |
| CSI-20001X125 | Power Supply, 12vdc, 100-240 Vac |
| CSI-20001X126 | Extender, Transformer |
| CSI-20001X231 | Valve Piston Assy |
| CSI-20016X006 | Motor Assy, Legacy View |
| CSI-20017X100 | Flow Control Housing W/O-Ring |
| CSI-20017X203 | Meter Assy, D15 |
| CSI-20017X214 | Drain Retainer Clip |
| CSI-20017X254 | O Ring, Dlfc Housing For Signature 3 Valve |
| CSI-20017X267 | DLFC Housing For Signature 3 Valve |
| CSI-20561X225 | Brine Piston Assy |
| CSI-20561X253 | Seal & Spacer Kit |
| CSI-21001X120 | Main Gear For Signature 3 Valve |
| CSI-22003X102 | Board W/Enclosure For Signature 3 Valve |
| CSI-33000X003 | Upper Basket |
| CSI-63555C115 | Aeration Balls, 1″, Pack Of 25 |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.15: DROP
Features
- Drop app allows you to control system from anywhere
- Water usage data and history
- Provides text messages, emails and/or push notifications for low salt and other system information to your smartphone
- Ability to shut off water to home with drop app
- Proprietary two valve manual bypass with 1” MNPT connections.
- 5 Year warranty
- Eliminates hardness (calcium & magnesium)
- Demand initiated regeneration
- Treated water refill with pre-brine option
- Adjustable cycle times
- 9v battery back up for loss of power
Valve Specifications
| Valve Materials | Noryl* |
| Inlet/Outlet | 1 |
| Cycles | 5 |
Flow Rates (50 PSI Inlet) – Valve Alone
| Continuous (15 psi drop) | 21 GPM |
| Peak (25 psi drop) | 27 GPM |
| Cv (flow at 1 psi drop) | 5.4 |
| Max. backwash (25 psi drop) | 17 GPM |
Regeneration
| Downflow/Up-flow | Downflow |
| Adjustable Cycles | Yes |
| Time Available | 99 minutes per cycle |
Meter Informaiton
| Meter Accuracy Range | .25 – 15 GPM +/- 5% |
| Meter Capacity Range (gal.) | 1 – 9,999 |
Dimensions
| Distributor Pilot | 1.05″ O.D. (26.7 mm) |
| Drain Line | ½” NPT Q.C. |
| Brine Line | ⅜ |
| Mounting Base | 2½ – 8 NPSM |
| Height From Top of Tank | 7.7 |
Typical Applications
| Water Softener | 6 – 16 Diameter up to 4 ft3 Capacity |
| Iron Filter | 6 – 16 Diameter |
| Sediment Filter | 6 – 16 Diameter |
| Carbon Filter | 6 – 16 Diameter |
| Neutralizing Filter | 6 – 16 Diameter |
Additional Information
| Electrical Rating | 24 v, 110 v, 220v – 50, 60Hz |
| Max VA | 72 |
| Electrical Rating | 2 VDC |
| Pressure | Hydrostatic: 300 psi Working: 20 – 125 psi |
| Temperature | 34° – 110° F |
Drop Series Valves:
| Item | Description |
| CSI-DRP-X500 | Drop Series Valve – Softener |
| CSI-DRP-X501 | Drop Series Valve – Filter |
| CSI-DRP-HPS | Drop – Home Protection Valve |
| CSI-DRP-CS125-SMM-Y | 1.25″ Drop Series Valve – Softener – Hard Water Bypass |
Drop Accessories:
| Item | Description |
| CSI-DRP-D-RMT | Drop Remote Module Assembly (Signal Booster), With Transformer |
| CSI-DRP-HUB | Hub For Drop Valves |
| CSI-DRP-LD | Drop – Leak Detector |
Drop Parts & Service Kit:
| Item | Description |
| CSI-DRP-CS125-BP | Drop – 1.25″ Plastic Bypass For Drop & Sig 3 Valve |
| CSI-DRP-X203 | Motorized Bypass For Drop Valve |
| CSI-DRP-X220 | Drop/Sig3 – Blue Injector 10″/12″ Tanks |
| CSI-DRP-X220-1 | Drop/Sig3 – Yellow Injector 14″ To 18″ Tanks |
| CSI-DRP-X267 | Drop/Sig3 – 2.0 Dlfc Button |
| CSI-DRP-X268 | Drop/Sig3 – 2.4 Dlfc Button |
| CSI-DRP-X269 | Drop/Sig3 – 3.0 Dlfc Button |
| CSI-DRP-X283 | Drop – Bypass For Drop & Sig 3 Valve |
| FCSI-DRP-X284 | Drop – 1″ Elbow Tailpieces |
| CSI-DRP-X288 | Drop – 1″ Straight Tailpieces – Slip |
| CSI-DRP-X307 | 3/4″ Straight Tailpieces, NPT Set |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.16: WWUSA-EZ3 SM
Features
- Backwash capacity handles tanks up to 12” diameter for softener applications, 10” for filter applications
- Solid state microprocessor with LED display
- Ruggedly built timer is designed with heavy-duty 3/8- wide plastic gears Compact turbine meter
- Continuous flow rate of 20 GPM
- Designed with double backwash
- Straight drainage or elbow drain connector option
- Low water use piston
Choose from 4 modes of operation:
- Immediate meter regeneration
- Delayed meter regeneration
- Delayed time clock regeneration
- Weekly schedule
Valve Specifications
| Service @ 15 psi drop | 20 GPM (includes meter and bypass) |
| Backwash @ 25 psi drop | 26 GPM (includes bypass) |
Tank Applications
| Softener | 6″ – 21″ diameter |
| Filter (1) | 6″ – 21″ diameter |
| Inlet/Outlet Fitting Connections | 1″ – 3/4″ NPT |
| Valve Material Cycles | Up to 5 |
| Regeneration | Down-flow |
| Operating Pressures | 20 – 125 psi |
| Operating Temperatures | 40° – 110° F |
Meters
| Flow Rate Range | 0.25 – 26 GPM |
| Volume Range (gallons) | 20 – 50,000 gallons |
| Totalizer | Yes |
| Distributor Pilot | 1.050″ O.D. Pipe ¾” NPS |
| Drain Line Connection | ¾” Male NPT Standard 1″ Male NPT Optional |
| Brine Line Connection | 3⁄8″ or 1⁄2″ O.D. Poly Tube Compression |
| Mounting Base Options | 2½” – 8 NPSM |
| Height From Top of Tank | 8.4″ |
| Shipping Weight | 4.5 lbs. |
Electrical
| Supply Voltage | 120V AC |
| Supply Frequency | 60 Hz |
| Output Voltage | 12V AC |
| Output Current | 500 mA |
WWUSA-EZ3 SM Valve:
| Item | Description |
| WWUSA-EZ3-SM | EZ3 Softener Valve, With Yoke |
EZ3 SM Parts & Service Kit:
| Item | Description |
| WWUSA-BLFC | EZ3 BLFC, 0.125 GPM To 1.0 GPM Kit |
| WWUSA-DLFC | EZ3 DLFC, 0.8 GPM To 7.0 GPM Kit |
| WWUSA-17357018 | EZ3 Transformer, 24v |
| WWUSA-18258056 | EZ3 Circuit Board |
| WWUSA-23557004 | EZ3 Brine Piston Assembly |
| WWUSA-23557019 | EZ3 Flow Meter Assembly |
| WWUSA-23560006 | EZ3 Seal & Spacer Kit |
| WWUSA-23580001 | EZ3 Piston Assembly |
| WWUSA-NOZZLE-THROAT | EZ3 Nozzle & Throat Assy, #000 #00 #0 #1 #2 #3 #4 |
| WWUSA-P18041 | EZ3 Bypass, Stainless Steel, 1″ NPT |
| WWUSA-P18042 | EZ3 Bypass, Stainless Steel, 3/4″ NPT |
| WWUSA-Z15002A | EZ3 Flow Meter Assembly |
| WWUSA-Z15003 | EZ3 Seal & Spacer Kit |
| WWUSA-Z15029 | EZ3 Brine Piston Assembly |
| WWUSA-Z15054 | EZ3 Piston Assembly |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.17: WWUSA-EZ3 FM
Features
- Backwash capacity handles tanks up to 12” diameter for softener applications, 10” for filter applications
- Solid state microprocessor with LED display
- Ruggedly built timer is designed with heavy-duty 3/8- wide plastic gears Compact turbine meter
- Continuous flow rate of 20 GPM
- Designed with double backwash
Valve Specifications
| Service @ 15 psi drop | 20 GPM (includes meter and bypass) |
| Backwash @ 25 psi drop | 26 GPM (includes bypass) |
Tank Applications
| Filter (1) | 6″ – 21″ diameter |
| Inlet/Outlet Fitting Connections | 1″ – 3/4″ NPT |
| Valve Material Cycles | Up to 5 |
| Operating Pressures | 20 – 125 psi |
| Operating Temperatures | 40° – 110° F |
Meters
| Flow Rate Range | 0.25 – 26 GPM |
| Volume Range (gallons) | 20 – 50,000 gallons |
| Totalizer | Yes |
| Distributor Pilot | 1.050″ O.D. Pipe ¾” NPS |
| Mounting Base Options | 2½” – 8 NPSM |
| Height From Top of Tank | 8.4″ |
| Shipping Weight | 4.5 lbs. |
Electrical
| Supply Voltage | 120V AC |
| Supply Frequency | 60 Hz |
| Output Voltage | 12V AC |
| Output Current | 500 mA |
WWUSA-EZ3 FM Valve:
| Item | Description |
| WWUSA-EZ3-FM | EZ3 Backwash Valve, With Yoke |
EZ3 FM Parts & Service Kit:
| Item | Description |
| WWUSA-BLFC | EZ3 BLFC, 0.125 GPM To 1.0 GPM Kit |
| WWUSA-DLFC | EZ3 DLFC, 0.8 GPM To 7.0 GPM Kit |
| WWUSA-17357018 | EZ3 Transformer, 24v |
| WWUSA-18258056 | EZ3 Circuit Board |
| WWUSA-23557004 | EZ3 Brine Piston Assembly |
| WWUSA-23557019 | EZ3 Flow Meter Assembly |
| WWUSA-23560006 | EZ3 Seal & Spacer Kit |
| WWUSA-23580001 | EZ3 Piston Assembly |
| WWUSA-NOZZLE-THROAT | EZ3 Nozzle & Throat Assy, #000 #00 #0 #1 #2 #3 #4 |
| WWUSA-P18041 | EZ3 Bypass, Stainless Steel, 1″ NPT |
| WWUSA-P18042 | EZ3 Bypass, Stainless Steel, 3/4″ NPT |
| WWUSA-Z15002A | EZ3 Flow Meter Assembly |
| WWUSA-Z15003 | EZ3 Seal & Spacer Kit |
| WWUSA-Z15029 | EZ3 Brine Piston Assembly |
| WWUSA-Z15054 | EZ3 Piston Assembly |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.18: HC-REVV4 CERAMIC VALVE
The most expandable and flexible valve on the market today. This valve utilizes up-flow regeneration to wash the media for more efficient and effective cleaning. Ultimate performance and reliability are available from the patented ceramic disc design with (7) seven advanced programming options with fully adjustable cycles.
Interlock features, signal outputs, and twin-demand options are available to supply water 24/7. Advanced work modes are available with (4) four adjustable cycle sequences to achieve the exact configuration needed for any application.
All ceramic components are guaranteed for life.
Features:
- Patented ceramic discs are corrosion and abrasion resistant for longer life and reduced maintenance
- Made of Corundum ceramic and graphene (200x stronger than steel!) With no wear parts to service or replace
- Hermetically sealed parts for impregnable resistance to corrosion, wear, or tear
- Maintenance-free actuators
- Ceramic Disk ByPass
- Lifetime guarantee on internal ceramic and graphene parts
- Bright, easy to read LCD display
- Multiple, programmable efficiency settings; grains exchanged per lb. of salt
- Long-term memory for program functions
- 72-hour memory backup
Valve Specifications
| Service @ 15 psi drop | 28 GPM (includes meter and bypass) |
| Backwash @ 25 psi drop | 19 GPM (includes bypass) |
Tank Applications
| Softener | 6″ – 21″ diameter |
| Filter (1) | 6″ – 21″ diameter |
| Inlet/Outlet Fitting Connections | 3/4″ – 1.25″ NPT |
| Valve Material Cycles | PPO |
| Regeneration | Down-flow/Up-flow |
| Operating Pressures | 20 – 125 psi |
| Operating Temperatures | 40° – 110° F |
Meters
| Flow Rate Range | 0.1 – 28 GPM |
| Volume Range (gallons) | 20 – 50,000 gallons |
| Totalizer | Yes |
| Distributor Pilot | 1.26 |
| Drain Line Connection | 1″ Male NPT Optional |
| Brine Line Connection | 3⁄8″ or 1⁄2″ O.D. Poly Tube Compression |
| Mounting Base Options | 2½” – 8 NPSM |
| Height From Top of Tank | 7.375″ |
Electrical
| Supply Voltage | 120V AC |
| Supply Frequency | 60 Hz |
| Output Voltage | 12V AC |
| Output Current | 500 mA |
HC-REVV4 and Accessories:
| Item | Description |
| HC-REVV4 | HANKSCRAFT REVV4 SOFTENER/FILTER VALVE |
| HC-REVV-PTT10-65 | HANKSCRAFT DISTRIBUTOR TUBE & LOWER BASKET ASSY, 32MM X 65″, REVV 4 |
| HC-REVV-213 | HANKSCRAFT UPPER BASKET, 32 MM |
| HC-41206 | HANKSCRAFT CERAMIC BYPASS, 19 GPM |
| HC-41207 | HANKSCRAFT CERAMIC BYPASS, 28 GPM |
| HC-REVV-210 | HANKSCRAFT ELBOW CONNECTORS, 1″ NPT INLET/OUTLET |
| HC-REVV4-CL | HANKSCRAFT REVV4, CLEAR BODY, SOFTENER/FILTER VALVE |
| HC-REVV212 | HANKSCRAFT VERTICAL BYPASS MOUNT |
| HC-REVV-221-V5.0 | HANKSCRAFT CONTROL BOARD KIT – REVV 4 – WITH POWER CABLE & CLIP |
| HC-6999049-142 | HANKSCRAFT CONTROL BOARD KIT – F142 – WITH POWER CABLE & CLIP |
| HC-REVV-222 | HANKSCRAFT DISPLAY BOARD KIT WITH CONNECTING CABLE & CLIP – F142, REVV 4 & REVV 2.5 |
| HC-Q310-20 | HANKSCRAFT BALL VALVE 2 WAY, MANUAL, 3/4″ GLUE |
| HC-Q310-25 | E 2 WAY, MANUAL, 1″ GLUE |
| HC-Q310-32 | HANKSCRAFT BALL VALVE 2 WAY, MANUAL, 1-1/4″ GLUE |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.19: HC-F142 Series CERAMIC VALVE
One of the most expandable and flexible valves on the market today. The F142 utilizes down-flow regeneration to wash the media for more efficient and effective cleaning. Ultimate performance and reliability are available from the patented ceramic disc design with (7) seven advanced programming options with fully adjustable cycles. This valve is specifically designed for twin tank setups.
The F142 valve features interlock, signal outputs, and twin demand to supply water 24/7. Advanced work modes are available with (4) four adjustable cycle sequences to achieve the exact configuration needed for all applications.
The ceramic components are guaranteed for life.
Features:
- Patented ceramic discs are corrosion and abrasion resistant for longer life and reduced maintenance
- Made of Corundum ceramic and graphene (200x stronger than steel!) with no wear parts to service or replace
- Hermetically sealed parts for impregnable resistance to corrosion, wear, or tear
- Maintenance-free actuators
- Ceramic Disk ByPass
- Lifetime guarantee on internal ceramic and graphene parts
- Bright, easy to read LCD display
- Multiple, programmable efficiency settings; grains exchanged per lb. of salt
- Long-term memory for program functions
- 72-hour memory backup
- Featuring made in USA NSF 41|63|372 certified Resin from Resin Tech
Valve Specifications
| Service @ 15 psi drop | 18 GPM (includes meter and bypass) |
| Backwash @ 25 psi drop | 13 GPM (includes bypass) |
Tank Applications
| Softener | 6″ – 21″ diameter |
| Filter (1) | 6″ – 21″ diameter |
| Inlet/Outlet Fitting Connections | 3/4″ – 1.25″ NPT |
| Valve Material Cycles | PPO |
| Regeneration | Down-flow/Up-flow |
| Operating Pressures | 20 – 125 psi |
| Operating Temperatures | 40° – 110° F |
Meters
| Flow Rate Range | 0.1 – 28 GPM |
| Volume Range (gallons) | 20 – 50,000 gallons |
| Totalizer | Yes |
| Distributor Pilot | 1.26 |
| Drain Line Connection | 1″ Male NPT Optional |
| Brine Line Connection | 3⁄8″ or 1⁄2″ O.D. Poly Tube Compression |
| Mounting Base Options | 2½” – 8 NPSM |
| Height From Top of Tank | 7.375″ |
Electrical
| Supply Voltage | 120V AC |
| Supply Frequency | 60 Hz |
| Output Voltage | 12V AC |
| Output Current | 500 mA |
HC-F142 and accessories:
| Item | Description |
| HC-F142 | HANKSCRAFT F142 SERIES VALVE |
| HC-REVV-PTT10-65 | HANKSCRAFT DISTRIBUTOR TUBE & LOWER BASKET ASSY, 32MM X 65″, REVV 4 |
| HC-REVV-213 | HANKSCRAFT UPPER BASKET, 32 MM |
| HC-41206 | HANKSCRAFT CERAMIC BYPASS, 19 GPM |
| HC-41207 | HANKSCRAFT CERAMIC BYPASS, 28 GPM |
| HC-REVV-210 | HANKSCRAFT ELBOW CONNECTORS, 1″ NPT INLET/OUTLET |
| HC-REVV4-CL | HANKSCRAFT REVV4, CLEAR BODY, SOFTENER/FILTER VALVE |
| HC-REVV212 | HANKSCRAFT VERTICAL BYPASS MOUNT |
| HC-REVV-221-V5.0 | HANKSCRAFT CONTROL BOARD KIT – REVV 4 – WITH POWER CABLE & CLIP |
| HC-6999049-142 | HANKSCRAFT CONTROL BOARD KIT – F142 – WITH POWER CABLE & CLIP |
| HC-REVV-222 | HANKSCRAFT DISPLAY BOARD KIT WITH CONNECTING CABLE & CLIP – F142, REVV 4 & REVV 2.5 |
| HC-Q310-20 | HANKSCRAFT BALL VALVE 2 WAY, MANUAL, 3/4″ GLUE |
| HC-Q310-25 | E 2 WAY, MANUAL, 1″ GLUE |
| HC-Q310-32 | HANKSCRAFT BALL VALVE 2 WAY, MANUAL, 1-1/4″ GLUE |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.20: HC-REVV20 CERAMIC commercial VALVE
Our HC-REVV20 Commercial Valve is a high-capacity, single tank valve for heavier usage applications. It is incredibly resistant against corrosion and features durable seals that make it virtually leakproof. The valve’s LED screen is easy to program and has memory functions to preserve settings even after being powered off. It also has a lockout function to disable the keypad after 1 minute, as well as a one-touch button to start a manual regeneration process when needed. All parameters of the system can be modified, pending water quality and usage levels fall within its thresholds. It also has an interlock feature to ensure that systems running in parallel will not regenerate at the same time and a signal output connector on the main board to connect and control external devices. The RevV20 can be configured for “by day” or “by hour” service levels for optimum efficiency and less water/salt consumption.
All ceramic components are guaranteed for life.
Features:
- Incredible resistance to corrosion and leaks
- Easy to program LED screen with memory
- Signal output connector
- Interlock functionality
- One-touch manual regeneration
- “By day” or “by hour” service levels
Valve Specifications
| Service @ 15 psi drop | 44 GPM (includes meter and bypass) |
| Backwash @ 25 psi drop | 28 GPM (includes bypass) |
Tank Applications
| Softener | 14″ – 34″ diameter |
| Filter (1) | 14″ – 34″ diameter |
| Inlet/Outlet Fitting Connections | 2.0 |
| Valve Material Cycles | PPO |
| Regeneration | Down-flow |
| Operating Pressures | 20 – 125 psi |
| Operating Temperatures | 40° – 110° F |
Meters
| Flow Rate Range | .1-45 GPM |
| Distributor Pilot | 1.91″ |
| Drain Line Connection | 1″ Male NPT Optional |
| Brine Line Connection | Poly Tube Compression |
| Mounting Base Options | 2½” – 8 NPSM |
| Height From Top of Tank | 7 3⁄8″ |
Electrical
| Supply Voltage | 120V AC |
| Supply Frequency | 60 Hz |
| Output Voltage | 12V AC |
| Output Current | 500 mA |
HC-REVV20:
| Item | Description |
| HC-REVV20 | HANKSCRAFT CERAMIC COMMERCIAL VALVE 1.5” |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.21: Clack WS1
SOLD AS COMPLETE SYSTEMS ONLY
Features
- Solid state microprocessor with easy access front panel settings
- Three modes of operation meter immediate, meter delayed, or time clock delayed
- Double backwash feature, offers optimum regeneration, cleaning ability, and efficiency
- 36 selectable pre-programmed regeneration cycles
- Days override feature 1 . 28 day’s available
Applications
- Backwash and brining ability to 22. diameter tanks
- Down-flow/up-flow regeneration
- Stores system configuration and operation data in nonvolatile memory
- Capacitor back-up with two hour power carry over
- 12 volt transformer provides safe and easy installation
Valve Specifications
| Service @ 15 psi drop | 27 GPM (includes meter and bypass) |
| Backwash @ 25 psi drop | 27 GPM (includes bypass) |
Tank Applications
| Softener | 6″ – 21″ diameter |
| Filter* | 6″ – 21″ diameter |
| Inlet/Outlet Fitting Connections | 1″ – 1.25″ NPT ¾” – 1.5″ Sweat ¾” – 1.5″ Solvent ¾” – 1″ SharkBite® |
| Valve Material Cycles | Noryl (2) Up to 6 |
| Regeneration | Down-flow/Up-flow |
| Operating Pressures | 20 – 125 psi |
| Operating Temperatures | 40° – 110° F |
Meters
| Flow Rate Range | 0.25 – 27 GPM |
| Volume Range (gallons) | 20 – 50,000 gallons |
| Totalizer | Yes |
| Distributor Pilot | 1.050″ O.D. Pipe ¾” NPS |
| Drain Line Connection | ¾” Male NPT Standard 1″ Male NPT Optional |
| Brine Line Connection | ⅜” or 1⁄2″ O.D. Poly Tube Compression |
| Mounting Base Options | 2½” – 8 NPSM |
| Height From Top of Tank | 7 ⅜” |
| Shipping Weight | 4.5 lbs. |
Electrical
| Supply Voltage | 120V AC |
| Supply Frequency | 60 Hz |
| Output Voltage | 12V AC |
| Output Current | 500 mA |
*Filter tank size calculated @ 10 GPM Of Backwash per square foot of bed area
WS1 Valves:
| Item | Description |
| CLK-WS1CSM | WS1 Valve, 1″ Metered Df, 12V, 5-Button, Specify DLFC & BLFC |
| CLK-WS1EEM | WS1EE Valve, 1″ Metered Df, 12V, 4-Button Fully Adjustable, Specify DLFC & BLFC |
| CLK-WS1SPM | WS1sp Valve, 1″ Metered Df, Solar Powered, 4-Button Fully Adj, Specify DLFC & BLFC |
| CLK-WS1TC | WS1TC Valve, 1″ Time Clock Df, 12V, 3-Button, Specify DLFC & BLFC |
| CLK-WS1BW | WS1BW Valve, 1″ Backwash Df, 12V, 3-Button, Specify DLFC |
WS1 Accessories:
| Item | Description |
| CLK-V3175WC-A | Almond Weather Cover For WS1/WS1.25 Valve |
| CLK-V3175WC-W | White Weather Cover For WS1/WS1.25 Valve |
| CLK-V3162-XXX | ¾” Drain Line Flow Control, WS1/WS1.25/WS1.5/WS2, Specify Size |
| CLK-V3190-XXX | 1″ Drain Line Flow Control, WS1/WS1.25/WS1.5/WS2, Specify Size |
| CLK-V3010-1X | Injector Assembly (Brine), WS1/WS1.25, Specify Color & Size |
| CLK-V3006 | Plastic Bypass, Requires Tail PCS, WS1/WS1.25 |
| CLK-V3007 | Tail PCS., 1″ Pvc Male NPT Elbow Fitting Assembly, WS1/WS1.25 |
| CLK-V3007-01 | Tail PCS., ¾” X 1″ Pvc Solvent Elbow Fitting Assembly, WS1/WS1.25 |
| CLK-V3007-02LF | Tail PCS., 1″ Brass Sweat Fitting Assembly, WS1/WS1.25 |
| CLK-V3007-03LF | Tail PCS., ¾” Brass Sweat Fitting Assembly, WS1/WS1.25 |
| CLK-V3007-04 | Tail PCS., 1″ Pvc Male NPT Straight Fitting Assembly, WS1/WS1.25 |
| CLK-V3007-05 | Tail PCS., 1.25″ Pvc Male NPT Straight Fitting Assembly, WS1/WS1.25 |
| CLK-V3007-07 | Tail PCS., 1.25″ & 1.5″ Pvc Solvent Elbow Fitting Assembly, WS1/WS1.25 |
| CLK-V3007-09LF | Tail PCS., 1.25 & 1.5″ Brass Sweat Fitting Assembly, WS1/WS1.25 |
| CLK-V3007-12 | Tail PCS., ¾” Shark Bite Fitting Assembly, WS1/WS1.25 |
| CLK-V3007-13 | Tail PCS., 1″ Shark Bite Fitting Assembly, WS1/WS1.25 |
| CLK-V3007-15 | Tail PCS., ¾” John Guest Elbow Fitting Assembly, WS1/WS1.25 |
| CLK-V3186 | 12Vac Transformer, Us 110V, WS1/WS1.25/WS1.5 Adapter 500 Ma |
| CLK-V3186-OD | 12Vac Transformer, Us 110V, WS1/WS1.25/WS1.5 Outdoor Adapter 500 Ma |
WS1 Parts & Service Kits:
| Item | Description |
| CLK-V3011 | Piston Assy, Downflow, WS1 |
| CLK-V3011-01 | Piston Assy, Up-flow, WS1 |
| CLK-V3174 | Piston Assy, Regenerant, WS1/WS1.25/WS1.5 |
| CLK-V3005 | Spacer Stack Assy, WS1 |
| CLK-V3010-1X | Injector Assembly (Brine), WS1/WS1.25, Specify Color & Size |
| CLK-V3107-01 | Motor Assembly, WS1/WS1.25 |
| CLK-V3003 | Meter Assembly, WS1/WS1.25 |
| CLK-V3108-09 | PC Circuit Board With Battery, WS1/WS1.25 (5-Button) |
| CLK-V3108-01 | PC Circuit Board With Battery, WS1CS/WS1.25CS (5-Button) |
| CLK-V3408-03 | PC Circuit Board With Battery, WS1EE/WS1.25EE/WS1.5EE/WS2EE (4-Button) |
| CLK-V3108-TC | PC Circuit Board With Battery, WS1TC/WS1BW/WS1.25TC/WS1.25BW (3-Button) |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.22: Clack WS1.25
SOLD AS COMPLETE SYSTEMS ONLY
Features
- Solid state microprocessor with easy access front panel settings
- ThrEE modes of operation meter immediate, meter delayed, or time clock delayed
- Double backwash feature, offers optimum regeneration, cleaning ability, and efficiency
- 36 selectable pre-programmed regeneration cycles
- Days override feature 1–28 days available
Applications
- Backwash and brining ability to 22" diameter tanks
- Downflow regeneration
- Stores system configuration and operation data in nonvolatile memory
- Coin Cell Lithium battery back-up with an 8 hr carry-over
- 12 volt transformer provides safe and easy installation
Valve Specifications
| Service @ 15 psi drop | 34 GPM (includes meter and bypass) |
| Backwash @ 25 psi drop | 32 GPM (includes bypass) |
Tank Applications
| Softener | 6″ – 21″ diameter |
| Filter* | 6″ – 24″ diameter |
| Inlet/Outlet Fitting Connections | 1″ – 1.25″ NPT ¾” – 1.5″ Sweat ¾” – 1.5″ Solvent ¾” – 1″ SharkBite® |
| Valve Material Cycles | Noryl (2) |
| Cycles | Up to 6 |
| Regeneration | Down-flow/Up-flow |
| Operating Pressures | 20 – 125 psi |
| Operating Temperatures | 40° – 110° F |
Meters
| Flow Rate Range | 0.25 – 34 GPM |
| Volume Range (gallons) | 20 – 50,000 gallons |
| Totalizer | Yes |
| Distributor Pilot | 1.32″ O.D. Pipe 1″ NPS |
| Drain Line Connection | ¾” Male NPT Standard 1″ Male NPT Optional |
| Brine Line Connection | ⅜” or 1⁄2″ O.D. Poly Tube Compression |
| Mounting Base Options | 2½” – 8 NPSM |
| Height From Top of Tank | 7 ⅜” |
| Shipping Weight | 4.5 lbs. |
Electrical
| Supply Voltage | 120V AC |
| Supply Frequency | 60 Hz |
| Output Voltage | 12V AC |
| Output Current | 500 mA |
- Filter tank size calculated @ 10 gpm of backwash per square foot of bed area
- Noryl is a trademark of Sabic Innovative Plastics IP B.V. Company
- Acquired by use of external drain line flow controL
WS1 Valves:
| Item | Description |
| CLK-WS125CSM | WS1.25 Valve, 1.25″ Metered Df, 12V, 5-Button, Specify DLFC & BLFC |
| CLK-WS125EEM | WS1.25 EE Valve, 1.25″ Metered Df, 12V, 4-Button Fully Adjustable, Specify DLFC & BLFC |
| CLK-WS125SPM | WS1.25 Sp Valve, 1.25″ Metered Df, Solar Powered, 4-Button Fully Adj, Specify DLFC & BLFC |
| CLK-WS125TC | WS1.25 TC Valve, 1.25″ Time Clock Df, 12V, 3-Button, Specify DLFC & BLFC |
| CLK-WS125BW | WS1.25 BW Valve, 1.25″ Backwash Df, 12V, 3-Button, Specify DLFC |
WS1.25 Accessories:
| Item | Description |
| CLK-V3175WC-A | Almond Weather Cover For WS1/WS1.25 Valve |
| CLK-V3175WC-W | White Weather Cover For WS1/WS1.25 Valve |
| CLK-V3162-XXX | ¾” Drain Line Flow Control, WS1/WS1.25/WS1.5/WS2, Specify Size |
| CLK-V3190-XXX | 1″ Drain Line Flow Control, WS1/WS1.25/WS1.5/WS2, Specify Size |
| CLK-V3010-1X | Injector Assembly (Brine), WS1/WS1.25, Specify Color & Size |
| CLK-V3006 | Plastic Bypass, Requires Tail PCS, WS1/WS1.25 |
| CLK-V3007 | Tail PCS., 1″ Pvc Male NPT Elbow Fitting Assembly, WS1/WS1.25 |
| CLK-V3007-01 | Tail PCS., ¾” X 1″ Pvc Solvent Elbow Fitting Assembly, WS1/WS1.25 |
| CLK-V3007-02LF | Tail PCS., 1″ Brass Sweat Fitting Assembly, WS1/WS1.25 |
| CLK-V3007-03LF | Tail PCS., ¾” Brass Sweat Fitting Assembly, WS1/WS1.25 |
| CLK-V3007-04 | Tail PCS., 1″ Pvc Male NPT Straight Fitting Assembly, WS1/WS1.25 |
| CLK-V3007-05 | Tail PCS., 1.25″ Pvc Male NPT Straight Fitting Assembly, WS1/WS1.25 |
| CLK-V3007-07 | Tail PCS., 1.25″ & 1.5″ Pvc Solvent Elbow Fitting Assembly, WS1/WS1.25 |
| CLK-V3007-09LF | Tail PCS., 1.25 & 1.5″ Brass Sweat Fitting Assembly, WS1/WS1.25 |
| CLK-V3007-12 | Tail PCS., ¾” Shark Bite Fitting Assembly, WS1/WS1.25 |
| CLK-V3007-13 | Tail PCS., 1″ Shark Bite Fitting Assembly, WS1/WS1.25 |
| CLK-V3007-15 | Tail PCS., ¾” John Guest Elbow Fitting Assembly, WS1/WS1.25 |
| CLK-V3186 | 12Vac Transformer, Us 110V, WS1/WS1.25/WS1.5 Adapter 500 Ma |
| CLK-V3186-OD | 12Vac Transformer, Us 110V, WS1/WS1.25/WS1.5 Outdoor Adapter 500 Ma |
WS1.25 Parts & Service Kits:
| Item | Description |
| CLK-V3407 | Piston Assy, Downflow, WS1.25/WS1.5 |
| CLK-V3174 | Piston Assy, Regenerant, WS1/WS1.25/WS1.5 |
| CLK-V3430 | Spacer Stack Assy, WS1.25/WS1.5/WS2l |
| CLK-V3010-1X | Injector Assembly (Brine), WS1/WS1.25, Specify Color & Size |
| CLK-V3107-01 | Motor Assembly, WS1/WS1.25 |
| CLK-V3003 | Meter Assembly, WS1/WS1.25 |
| CLK-V3108-09 | PC Circuit Board With Battery, WS1/WS1.25 (5-Button) |
| CLK-V3108-01 | PC Circuit Board With Battery, WS1CS/WS1.25CS (5-Button) |
| CLK-V3408-03 | PC Circuit Board With Battery, WS1EE/WS1.25EE/WS1.5EE/WS2EE (4-Button) |
| CLK-V3108-TC | PC Circuit Board With Battery, WS1TC/WS1BW/WS1.25TC/WS1.25BW (3-Button) |
| CLK-V3108-TC | PC Circuit Board With Battery, WS1TC/WS1BW/WS1.25TC/WS1.25BW (3-Button) |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.23: Clack WS1EE
SOLD AS COMPLETE SYSTEM ONLY
Features
- Service flow 28 GPM, backwash flow 15 GPM with meter and bypass installed
- Solid state microprocessor with easy access front panel settings
- Front panel display for time of day, days until next regeneration, volume remaining, current flow rate and total volume used (Totalizer), and Tank in Service Indication
- Four methods to initiate regeneration; meter immediate, meter delayed, time clock delayed or pressure differential
- Optional double backwash feature offers optimum regeneration, cleaning ability and efficiency
- Adjustable cycle times with 6-cycle control delivers controlled backwash, down flow brining/slow rinse, second backwash, fast rinse, refill and down flow service
- Coin Cell Lithium battery back-up with a 8 hour carry over
- Backwash and brining ability to 21” diameter tanks
- Down flow or up flow brining regeneration
- 12-volt output AC Adapter provides safe and easy installation
- Treated/Soft water post !ll and regeneration cycles
- Patented one piece expanding seal spacer stack assembly U.S. Patent 6,402,944
- Patented linearly reciprocating piston operation U.S. Patent 6,444,127
- Reliable and proven DC drives
Valve Specifications
| Inlet/Outlet Fittings | ¾” to 1.5” NPS |
Flow rates
| Service @15 psi drop (includes bypass and meter) | 28 GPM |
| Backwash @ 25 psi drop (includes bypass) | 15 GPM |
Operating Pressures
| Minimum/Maximum | 20 psi – 125 psi |
Operating Temperatures
| Minimum/Maximum | 40º – 110º F |
Meter
| Accuracy | 40º – 110º F |
| Flow Rate Range | 0.25 – 30 GPM |
| Gallon Range | 20 – 1,500,000 gallons |
Dimensions & Weight
| Distributor Pilot | 1.050″ OD Pipe (¾” NPS) |
| Drain Line | ¾” or 1” Male NPT |
| Brine Line | ⅜” or ½” OD Poly Tube Compression |
| Mounting Base | 2½” – 8 NPSM |
| Height From Top Of Tank | 7⅜” |
| Weight | 16 lbs. |
Electrical Specifications
| U.S. | Internationl | |
| Supply Voltage | 120V AC | 230V AC |
| Supply Frequency | 60 Hz | 50 Hz |
| Output Voltage | 12V AC | 12V AC |
| Output Current | 500 mA | 500 mA |
Tank Applications
| Water Softener | 6” – 21” diameter |
| Water Filter (2) | 6” – 16” diameter |
WS1EE Twin Alternating Control Valve Accessories Parts & Service Kits:
| Item | Description |
| CLK-V3005 | WS Spacer Stack Assembly |
| CLK-V3004 | Drive Cap Assembly |
| CLK-V3011* | WS1 Piston Down Flow Assembly |
| CLK-V3011-01* | WS1 Piston Up Flow Assembly |
| CLK-V3174 | WS1 Regeneration Piston |
| CLK-V3135 | O-Ring 228 |
| CLK-V3151 | WS1 Nut 1″ Quick Connect |
| CLK-V3150 | WS1 Split Ring |
| CLK-V3105 | O-Ring 215 |
| CLK-4017 | T1 Interconnecting Fittings |
| CLK-V3151 | WS1 Nut 1″ Quick Connect |
| CLK-V315 | WS1 Split Ring |
| CLK-V3105 | O-Ring 215 |
| CLK-V3352 | WS1 Titting 1¼” & 1½” Pvc Solvent |
| CLK-V3352 | Pipe Pvc Sch 80 1¼” X 2+ |
| CLK-V4052 | Pipe Pvc Sch 80 1¼” X 2+ |
| CLK-V3180 | O-Ring 337 |
| CLK-V3105 | O-Ring 215 (Distributor Tube) |
| CLK-V3176 | Injector Cap |
| CLK-V3152 | O-Ring 135 |
| CLK-V3177-01 | Injector Screen Cage |
| CLK-V3015-1Z | WS1 Injector Assembly Z Plug |
| CLK-V3010-1A | WS1 Injector Assembly A Black |
| CLK-V3010-B | WS1 Injector Assembly B Brown |
| CLK-V3010-C | WS1 Injector Assembly C Violet |
| CLK-V3010-D | WS1 Injector Assembly D Red |
| CLK-V3010-E | WS1 Injector Assembly E White |
| CLK-V3010-F | WS1 Injector Assembly F Blue |
| CLK-V3010-G | WS1 Injector Assembly G Yellow |
| CLK-V3010-H | WS1 Injector Assembly H Green |
| CLK-V3010-I | WS1 Injector Assembly I Orange |
| CLK-V3010-J | WS1 Injector Assembly J Light Blue |
| CLK-V3010-K | WS1 Injector Assembly K Light Green |
| CLK-V3176 | O-Ring 011 |
| CLK-V3171 | O-Ring 013 |
| CLK-V3159-1 | WSI DLFC Retainer Assembly |
| CLK-V3162-007 | WSI DLFC 0.7 GPM FO ¾ |
| CLK-V3162-010 | WSI DLFC 1.0 GPM FO ¾ |
| CLK-V3162-013 | WSI DLFC 1.3 GPM FO ¾ |
| CLK-V3162-017 | WSI DLFC 1.7 GPM FO ¾ |
| CLK-V3162-022 | WSI DLFC 2.2 GPM FO ¾ |
| CLK-V3162-027 | WSI DLFC 2.7 GPM FO ¾ |
| CLK-V3162-032 | WSI DLFC 3.2 GPM for ¾ |
| CLK-V3162-042 | WSI DLFC 4.2 GPM for ¾ |
| CLK-V3162-053 | WSI DLFC 5.3 GPM for ¾ |
| CLK-V3162-065 | WSI DLFC 6.5 GPM for ¾ |
| CLK-V3162-075 | WSI DLFC 7.5 GPM for ¾ |
| CLK-V3162-090 | WSI DLFC 9.0 GPM for ¾ |
| CLK-V3162-100 | WSI DLFC 10.0 GPM for ¾ |
| CLK-V3190-090 | WSI DLFC 9.0 GPM for 1 |
| CLK-V3190-100 | WSI DLFC 10.0 GPM for 1 |
| CLK-V3190-110 | WSI DLFC 11.0 GPM for 1 |
| CLK-V3190-130 | WSI DLFC 13.0 GPM for 1 |
| CLK-V3190-150 | WSI DLFC 15.0 GPM for 1 |
| CLK-V3190-170 | WSI DLFC 17.0 GPM for 1 |
| CLK-V3190-200 | WSI DLFC 20.0 GPM for 1 |
| CLK-V3190-250 | WSI DLFC 25.0 GPM for 1 |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.24: Clack WS1.5
SOLD AS COMPLETE SYSTEM ONLY
Features:
- 1½" top mount control valve suited for mid-size commercial/industrial applications
- Front panel display for time of day, days until next regeneration, volume remaining, current flow rate and total volume used (Totalizer)
- Four methods to initiate regeneration; meter immediate, meter delayed, time clock delayed or pressure differential
- Optional double backwash feature offers optimum regeneration, cleaning ability and efficiency
- Fully adjustable 6-cycle control delivers controlled backwash, down-flow brining/slow rinse, second backwash, fast rinse, refill and down-flow service
- 12 volt transformer provides safe and easy installation
- Treated water regenerant refill
- Lead free brass valve body
- Economical optional meter
- Service flow rate of 60 GPM, backwash 50 GPM
- Solid state microprocessor with easy access front panel settings
Valve Specifications
| Service @ 15 psi drop | 27 GPM (includes meter and bypass) |
| Backwash @ 25 psi drop | 27 GPM (includes bypass) |
Tank Applications
| Softener Filter (1) | 6″ – 21″ diameter |
| Filter (1) | 6″ – 21″ diameter |
| Inlet/Outlet Fitting Connections |
1″ – 1.25″ NPT 3⁄4″ – 1.5″ Sweat 3⁄4″ – 1.5″ Solvent 3⁄4″ – 1″ SharkBite® |
| Valve Material Cycles | Noryl (2) Up to 6 |
| Regeneration | Down-flow/Up-flow |
| Operating Pressures | 20 – 125 psi |
| Operating Temperatures | 40° – 110° F |
Meters
| Flow Rate Range | 0.25 – 34 GPM |
| Volume Range (gallons) | 20 – 50,000 gallons |
| Totalizer | Yes |
| Drain Line Connection |
1.25″ Female NPT with 3⁄4″ Male NPT Standard 1″ Male NPT Optional |
| Brine Line Connection |
3⁄4″ Female NPT 1⁄2″ O.D. Poly Tube Compression |
| Mounting Base Options | 4″ – 8 UN |
| Height From Top of Tank | 9.5″ |
| Shipping Weight | 21 lbs. |
Electrical
| Supply Voltage | 120V AC |
| Supply Frequency | 60 Hz |
| Output Voltage | 12V AC |
| Output Current | 500 mA |
1. Filter Tank Size Calculated @ 10 GPM Of Backwash Per Square Foot of Bed Area
WS1EE Twin Alternating Control Valve Accessories Parts & Service Kits:
| Item | Description |
| CLK-WS150EEM | WS1.5 Ee Valve, 1.5″ Metered Df, 12V, 4-Button Fully Adjustable, Specify DLFC & BLFC |
| CLK-WS150SPM | WS1.5 Sp Valve, 1.5″ Metered Df, Solar Powered, 4-Button Fully Adj, Specify DLFC & BLFC |
| CLK-WS150TC | WS1.5 Tc Valve, 1.5″ Time Clock Df, 12V, 4-Button, Specify DLFC & BLFC |
| CLK-WS150BW | WS1.5 Bw Valve, 1.5″ Backwash Df, 12V, 4-Button, Specify DLFC |
“Choose Tank Size, Add Resin or Media – Sold As Complete System Only”
WS1.5 Accessories:
| Item | Description |
| CLK-V3442WC-A | Almond Weather Cover For WS1.5 |
| CLK-V3442WC-W | White Weather Cover For WS1.5 |
| CLK-V3162-XXX | ¾” Drain Line Flow Control, WS1/Ws1.25/WS1.5/WS2, Specify Size |
| CLK-V3190-XXX | 1″ Drain Line Flow Control, WS1/WS1.25/WS1.5/WS2, Specify Size |
| CLK-V3079-XXX | 1.25″X1.5″ Drain Line Flow Control, WS1.5/WS2, Specify Size |
| CLK-V3010-15X | Injector Assembly (Brine), WS1.5/WS2l, Specify Color & Size |
| CLK-V3186 | 12Vac Transformer, Us 110V, WS1/WS1.25/WS1.5 Adapter 500 MA |
| CLK-V3186-OD | 12Vac Transformer, Us 110V, WS1/WS1.25/WS1.5 Outdoor Adapter 500 MA |
WS1.5 Parts & Service Kits:
| Item | Description |
| CLK-V3407 | Piston Assy, Downflow, WS1.25/WS1.5 |
| CLK-V3174 | Piston Assy, Regenerant, WS1/WS1.25/WS1.5 |
| CLK-V3430 | Spacer Stack Assy, WS1.25/WS1.5/WS2l |
| CLK-V3886 | Spacer Stack Assy, WS1.5, No Hard Water Bypass |
| CLK-V3010-15X | Injector Assembly, WS1.5/WS2l, Specify Color & Size |
| CLK-V3728 | Drive Cap Assembly, WS1.5/WS2 |
| CLK-V3003-02 | Meter Commercial Assembly, WS1.5/WS2l/WS2h |
| CLK-V3408-03 | Pc Circuit Board With Battery, WS1EE/WS1.25ee/WS1.5EE/WS2EE (4-Button) |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.25: Clack WS2
SOLD AS COMPLETE SYSTEM ONLY
- 1½" top mount control valve suited for mid-size commercial/industrial applications
- Front panel display for time of day, days until next regeneration, volume remaining, current flow rate and total volume used (Totalizer)
- Four methods to initiate regeneration; meter immediate, meter delayed, time clock delayed or pressure differential
- Optional double backwash feature offers optimum regeneration, cleaning ability and efficiency
- Fully adjustable 6-cycle control delivers controlled backwash, down-flow brining/slow rinse, second backwash, fast rinse, refill and down-flow service
- 12 volt transformer provides safe and easy installation
- Treated water regenerant refill
- Lead free brass valve body
- Economical optional meter
- Service flow rate of 60 GPM, backwash 50 GPM
- Solid state microprocessor with easy access front panel settings
Valve Specifications
| Service @ 15 psi drop | 34 gpm (includes meter and bypass) |
| Backwash @ 25 psi drop | 27 GPM (includes bypass) |
Tank Applications
| Softener Filter (1) | 6″ – 21″ diameter |
| Filter (1) | 6″ – 21″ diameter |
| Inlet/Outlet Fitting Connections |
1″ – 1.25″ NPT ¾” – 1.5″ Sweat ¾” – 1.5″ Solvent ¾” – 1″ SharkBite® |
| Valve Material Cycles | Noryl (2) Up to 6 |
| Regeneration | Down-flow/Up-flow |
| Operating Pressures | 20 – 125 psi |
| Operating Temperatures | 40° – 110° F |
Meters
| Flow Rate Range | 0.25 – 34 GPM |
| Volume Range (gallons) | 20 – 50,000 gallons |
| Totalizer | Yes |
| Distributor Pilot |
1.32″ O.D. Pipe 1″ NPS |
| Drain Line Connection |
¾” Male NPT Standard 1″ Male NPT Optional |
| Brine Line Connection | ⅜” or ½” O.D. Poly Tube Compression |
| Mounting Base Options | 2½” – 8 NPSM |
| Height From Top of Tank | 7⅜” |
| Shipping Weight | 4.5 lbs. |
Electrical
| Supply Voltage | 120V AC |
| Supply Frequency | 60 Hz |
| Output Voltage | 12V AC |
| Output Current | 500 mA |
- Filter Tank Size Calculated @10 GPM of Backwash Per Square Foot of Bed Area
- Noryl Is A Trademark Of Sabic Innovative Plastics IP B.V. Company
- Acquired By Use Of External Drain Line Flow Control
WS2 Control Valves:
| Item | Description |
| CLK-WS200EEM | WS2 EE Valve, 2″ Metered DF, 12V, 4-Button Fully Adjustable, Specify DLFC & BLFC |
| CLK-WS150SPM | WS2 SP Valve, 2″ Metered DF, Solar Powered, 4-Button Fully Adj, Specify DLFC & BLFC |
| CLK-WS150TC | WS2 TC Valve, 2″ Time Clock DF, 12V, 4-Button, Specify DLFC & BLFC |
| CLK-WS150BW | WS2 BW Valve, 2″ Backwash DF, 12V, 4-Button, Specify DLFC |
WS2 Accessories:
| Item | Description |
| CLK-V3783WC-A | Almond Weather Cover For WS2 |
| CLK-V3783WC-W | White Weather Cover For WS2 |
| CLK-V3162-XXX | ¾” Drain Line Flow Control, WS1/Ws1.25/WS1.5/WS2, Specify Size |
| CLK-V3190-XXX | 1″ Drain Line Flow Control, WS1/WS1.25/WS1.5/WS2, Specify Size |
| CLK-V3079-XXX | 1.25″X1.5″ Drain Line Flow Control, WS1.5/WS2, Specify Size |
| CLK-V3010-15X | Injector Assembly (Brine), WS1.5/WS2l, Specify Color & Size |
| CLK-V3186 | 12Vac Transformer, Us 110V, WS1/WS1.25/WS1.5 Adapter 500 MA |
| CLK-V3186-OD | 12Vac Transformer, Us 110V, WS1/WS1.25/WS1.5 Outdoor Adapter 500 MA |
WS1.5 Parts & Service Kits:
| Item | Description |
| CLK-V3725 | Piston Assy, Downflow, WS2 |
| CLK-V3174 | Piston Assy, Regenerant (Brine), WS2 |
| CLK-V3430 | Spacer Stack Assy, WS2 |
| CLK-V3886 | Spacer Stack Assy, WS2, No Hard Water Bypass |
| CLK-V3010-15X | Injector Assembly, WS1.5/WS2l, Specify Color & Size |
| CLK-V3728 | Drive Cap Assembly, WS1.5/WS2 |
| CLK-V3003-02 | Meter Commercial Assembly, WS1.5/WS2l/WS2h |
| CLK-V3408-03 | PC Circuit Board With Battery, WS1EE/WS1.25EE/WS1.5EE/WS2EE (4-Button) |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.
18.26: Clack WS3
SOLD AS COMPLETE SYSTEM ONLY
Features:
- 3” top mount or side mount control valve suited for commercial and industrial applications
- Lead free brass valve body
- Economical stainless steel optional meter assembly
- Service flow rate 250 GPM (946 lpm), Backwash flow rate 220 GMP (833 lpm)
- Solid state microprocessor with easy access front removable POD
- Front panel display for Time of Day, Current Flow Rate, Totalizer and Volume/Days until Regeneration
- Four methods to initiate the down flow regeneration; meter delayed, meter immediate, time clock delayed, or pressure differential
- Fully programmable regeneration cycle sequences (maximum 9)
- Fully programmable regeneration cycle times
- Treated water regenerant refill
- Days override feature; 1-28 days available
- Capacitor back-up with up to 24 hour power carry over
- 24-volt output AC adapter provides safe and easy installation
- Reliable and proven DC drive
Valve Specifications
| Inlet/Outlet (1) | 3” Female NPT or BSPT |
Control Valve Flow Rates
| Service@15 psi/1 bar drop | 250 GMP (946 lpm) |
| Backwash@25 psi/1.7 bar drop | 220 GMP (833 lpm) |
Operating Pressures
| Minimum/Maximum | 20-125 psi (1.4-8.6 bar) |
Operating Pressures
| Minimum/Maximum | 40°-110°F (4°-43°C) |
Operating Pressures
| Accuracy | ± 5°/o |
| Flow Rate Range | 3.5-350 GPM (13.3-1325 lpm) |
| Volume Range | 10 – 999,000 gallons (38 – 3,796.2 liters x1000) |
| Totalizer | 000- 999,999,000 gallons (3,786-3, 785,407.9 liters x1000) |
Dimensions & Weight
| Distributor Pilot | |
| Valve Bodies with 3”Female NPT Inlet & Outlet | 3.5” OD (3”NPS) |
| Valve Bodies with3” Female BSPT Inlet & Outlet | 90mm OD |
| Drain Line Connection | 3” Female NPT ”NoGrooveLock” |
| Brine Line Adapters Included | 1” Male NPT elbow and ¾” x 1” solvent weld elbow |
| Mounting Base | 6” Flange or Side Mount |
| Height From Top Of Tank | 12.25”( 311 mm) |
| Shipping Weight With out Optional Meter | 2½” – 8 NPSM |
| Shipping Weight With out Optional Meter | 57 lbs (25.9 Kg) |
Electrical Specifications AC Adapter
| U.S. | International | |
| Supply Voltage | 120V AC | 230V AC |
| Supply Frequency | 60 Hz | 50Hz |
| Output Voltage | 24V AC | 24V AC |
| Output Current | 750 mA | 750 mA |
Tank Applications
| Water Softener | 18”- 63” Diameter with standard injectors, to 96”with Brine Pump |
| Water Filter(2) | 18”-63” Diameter |
WS3 Control Valve Injectors:
| Item | Description |
| CLK-V3010-2A | WS2/2H/3 Injector Assembly A (18″ Down-flow) |
| CLK-V3010-2B | WS2/2H/3 Injector Assembly B (21″ Down-flow) |
| CLK-V3010-2C | WS2/2H/3 Injector Assembly C (24″ Down-flow) |
| CLK-V3010-2D | WS2/2H/3 Injector Assembly D (30″ Down-flow) |
| CLK-V3010-2E | WS2/2H/3 Injector Assembly E (36″ Down-flow) |
| CLK-V3010-2F | WS2/2H/3 Injector Assembly F (42″ Down-flow) |
| CLK-V3010-2G | WS2/2H/3 Injector Assembly G (48″ Down-flow) |
| CLK-V3010-2H | WS2/2H/3 Injector Assembly H (63″ Down-flow) |
Actual injector size used may vary depending on the design and application of the system. Injectors in table are sized for a typical down-flow softener using standard mesh synthetic cation exchange media regenerating with sodium chloride.
WS3 Front Cover And Drive Assembly:
| Item | Description |
| CLK-V3068-16-15 | WS2H Pod Front-Back Covers |
| CLK-V3082-168-67 | WS2H Pod Assembly Complete W/Board* |
| CLK-V3241-01-98-69 | WS2H PC Board Display |
| CLK-V3248-27-86 | WS2H Cable Display Pod |
| CLK-V3242-01-138-74 | WS2H Pc Board Valve |
| CLK-V3224-01R16-39 | WS2H Cover Assembly Platinum |
| CLK-V3107-01 | WS1 Motor Assembly |
| CLK-V3109 | WS1 Drive Gear Cover |
| CLK-V3461 | WS2H Ac Adapter (Shipped Less Cord) |
| CLK-V3243-01 | WS2H Pc Board System |
V3764 WS3 DLFC NPT Assembly or V3764BSPT WS3 DLFC BSPT Assembly:
| Item | Description |
| CLK-V3190-090 | WS1 DLFC 9.0 GPM for 1 |
| CLK-V3190-100 | WS1 DLFC 10.0 GPM for 1 |
| CLK-V3190-110 | WS1 DLFC 11.0 GPM for 1 |
| CLK-V3190-130 | WS1 DLFC 13.0 GPM for 1 |
| CLK-V3190-150 | WS1 DLFC 15.0 GPM for 1 |
| CLK-V3190-170 | WS1 DLFC 17.0 GPM for 1 |
| CLK-V3190-200 | WS1 DLFC 20.0 GPM for 1 |
| CLK-V3190-250 | WS1 DLFC 25.0 GPM for 1 |
| CLK-V3765-01-102-95 | WS3 DLFC HOUSING NPT |
| CLK-V3766-21-65 | WS3 DLFC Retainer |
| CLK-V3767-8-42 | WS3 DLFC Retainer Cover |
| CLK-V3768-8-42 | WS3 DLFC Retainer Ring |
| CLK-V3769-87 | O-Ring 336 |
WS3 parts & service kits:
| Item | Description |
| CLK-V3085 | WS3 MAV Drive Cap Assembly |
| CLK-V3695-01 | WS3 MAV Piston |
| CLK-V3084 | WS3 MAV Stack Assembly |
| CLK-V3693-01 | WS3 MAV Body NPT |
| CLK-V3693BSPT-01 | WS3 MAV Body BSPT |
| CLK-V3475-12 | WS2H/WS3 System Connection Cord 12 Foot Red |
| CLK-V3475-24 | WS2H/WS3 System Connection Cord 24 Foot Blue |
| CLK-V3475-36 | WS2H/WS3 System Connection Cord 36 Yellow |
| CLK-V3093-71-02 | WS3 Drive Assembly |
| CLK-V3289-1-34 | O-Ring 344 |
| CLK-V3666-01-48-05 | WS3 Piston |
| CLK-V3238-01-24-64* | WS2H/3 Brine Piston |
| CLK-V3092-58-88 | WS3 Stack Assembly |
| CLK-V3221 | WS Remote Meter Assembly 15 Ft Cord (Includes V3118-03, V3501 And V3105) |
| CLK-V3601-01 | WS3 Meter NPT Housing |
| CLK-V3632 | WS1.5/2/3 Meter Retaining Clip |
| CLK-V3151-48 | WS1 NUT 1 QC |
| CLK-V3149-93 | WS1 FTG 1 Pvc Male NPT Elbow |
| CLK-V3674-02-224-51 | WS3 Side Mount NPT Assembly |
Don’t see it? We’ve probably got it. Just feel free to contact our sales department with any requirements.